2 instances of dvblast

[savskii]

Hi, Is it possible to use 2 instances of dvblast or astra ?

so i can use BOTH tuners at same time?

everytime i try launce a second instance the first one stops

thnaks

[gfi]

Hi, Is it possible to use 2 instances of dvblast or astra ?

so i can use BOTH tuners at same time?

everytime i try launce a second instance the first one stops

thnaks

Need more info...

Used Transponders values, how much channels You want streaming. Protocol (udp/tcp - multicast/unicast/http).
There's some limitations (network, chipset), control CPU usage with top.

[savskii]

Hi mate,

on each transponder there is 5 channels each.

when i run :
dvblast22 -a 0 -c /home/dvblast/JSC1.conf -f 12284000 -s 27500000 -v 13 -C -Y -e -U

works fine... but when i run:

dvblast22 -a 1 -c /home/dvblast/JSC2.conf -f 11958000 -s 27500000 -v 18 -C -Y -e -U

both dont work......

[updatelee]

you cant run two applications on the same adapter (-a 0) especially at different voltages lol.

You sir need a second adapter

UDL

[savskii]

haha is a type error

thanks

has anyone scanned 2 tp's using astra or dvblast?

[updatelee]

no worries

is the config files on each of those pointing to different IP's

I honestly have little experience with multicast and the few times Ive used it I use mumudvb. multicast is wonky on my network, it locks up all wifi until I close the multicast application.

UDL

[atvcomm]

I have 20 MOI and all working with 2 transponders
Only one problem, can't to use more of 9 channel, don't have enough CPU power
Another problems with MOI is problem with LNB power supply and splitter for more devices
I cut directly in MOI output power wire, because 2 or more MOI have problem with that
I try to stopped supply in configuration, but unsuccessful, TS discontinued error. After cutting, working fine

[savskii]

hey guys, i have tryed all methods and i find maximum number of streams i can get out of MOI is 5 channels.....

I have tryed dvblast and astra with no luck runnng 2 similtaniuos occasions of same program or even running 2 diferent apps, i find the cpu gets to 90-99% as soon as i run ONE program

cheers