TBSDTV Community Forum

I tried too much to configure built-in CAM module
using professional cams SMITH , POWER CAM HD

OSCAM work only on USB mouse and its work perfect and descramble viacess and iredto

my worked config on USB TBS3102 5 Crystal Phoenix Card Reader

Code: Select All Code

[reader]
Label = JSC
Device = /dev/ttyUSB0
Protocol = mouse
EMMCache = 0,1,3,2
Group = 1
caid = 0603
services = irdeto
detect = CD


this is not work with same card but using Smit Pro and Smit Secure irdeto , also using powercam HD

Code: Select All Code

[reader]
label                         = JSC
protocol                      = internal
device                        = /dev/dvb/adapter0/ca0
group                         = 1
EMMCache = 0,1,3,2
Group = 1
caid = 0603
services = irdeto
detect = CD

[reader]
label                         = JSC1
protocol                      = internal
device                        = /dev/dvb/adapter1/ca0
group                         = 1
EMMCache = 0,1,3,2
Group = 1
caid = 0603
services = irdeto
detect = CD



I tired to play with Mhz of cards

still got 0 s init for all local cards done

any help plz

150 view with no replay