Moderator Control Panel ]

TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

What software to use? Good question, do some digging here and find the best one for you.

TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby nwagenaar » Sun Aug 31, 2014 9:21 pm

I had some additional time at my disposal, so I decided to compile the latest TVHeadend 3.9 git for the MOI DVB-S2 Streaming Box.

These builds are provided as is, are are not optimized in any way and using them is at your own risk. I can't be held responsible for any issues that may arise like bricked or unstable devices. They seemed to work fine on my MOI DVB-S2 with firmware 2.0.3, but this doesn't mean it'll work for you.

As always: before putting these files on your MOI, please make a backup of the tvheadend and oscam binaries (residing in /usr/bin and /usr/local/bin) and config-files (residing in /.hts and /usr/local/etc) before overwriting them.

Because the current TVHeadend git-version is using a new config, you'll need to convert the /.hts/tvheadend folder using the migration tool (see: https://www.tvheadend.org/boards/5/topics/9792) or start over again. Another option would be to use a Enigma2/LameDB channellist and us the lamedb2tvh script (https://bitbucket.org/picons/lamedb2tvh/src) to convert it.

The file includes the following binaries:

- OSCAM 1.2 Revision 9842 (latest git, compiled with libdvbcsa support with support for USB-readers)
- Changed tvheadend.sh script for /usr/bin for use with oscam
- TVHeadend 3.9 (latest git, compiled with libdvbcsa support)

Grab the file from here: http://shalafi.home.xs4all.nl/moi/20143 ... bs2.tar.gz
nwagenaar
 
Posts: 32
Joined: Tue Jul 30, 2013 3:19 am

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby wobi86 » Thu Sep 04, 2014 8:00 pm

Hi, first of all thanks for compiling TVH.

Can you tell me what I should do to upgrade on moi? I'm not sure where to copy your files on moi. It is also okay for me to reset all settings.
wobi86
 
Posts: 3
Joined: Thu Sep 04, 2014 1:13 pm

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby apol » Sat Sep 13, 2014 11:22 pm

THX !!! nwagenaar works nice with xbmc;) i switched off oscam(in .sh) and conected to server via internal newcamd works nice to .

reconfigured from new ;) and works GOOD

here howto new config

https://www.tvheadend.org/boards/5/topics/9792?page=2


[b]wobi86[b] to /usr/bin/ need copy to files tvheadend and tvheadend.sh
to /usr/local/bin/ ( file name oscam )

ale files in archive in corespondent folders

connect ftp to moi i overwrite

reboot and enjoy

my firmware rev 2.0.3
apol
 
Posts: 3
Joined: Wed Dec 04, 2013 2:02 am

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby nwagenaar » Fri Jan 23, 2015 8:57 pm

I compiled a new version (3.9.2413~gdcdef42), grab it from here: http://shalafi.home.xs4all.nl/moi/20152 ... bs2.tar.gz
nwagenaar
 
Posts: 32
Joined: Tue Jul 30, 2013 3:19 am

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby deffcon » Sun Feb 08, 2015 4:41 pm

Niels,

Can you explain the buildroot process for tvheadend and oscam for the MOI ? Did you build an whole U-boot image with buildroot or just binaries ?
I tried you're binaries and on first hand it seems to work, but a lot of artifacts and hickups, maybe we can build better images for the TBS MOI with tvheadend 3.x and oscam?

Let me know.

Dave
deffcon
 
Posts: 8
Joined: Thu Sep 15, 2011 10:29 pm

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby nwagenaar » Mon Feb 09, 2015 4:00 am

My MOI is currently out of business because my dish-reception is a bit flaky (I need to realign, but I haven't had the time). So I can't really test the new binaries myself. However, these ones worked quite good in my case and they were quite stable. Although I must confess that certain revisions crashed on me a number of times after a couple of days. But hell, it's bleeding edge :)

I started with building the entire buildroot tree (using this config: http://shalafi.home.xs4all.nl/moi/config); but I'm only grabbing the tvheadend, vdr and/or oscam binaries. When a new revision comes along I just simply clean the files/folders from the dl and output/build folders; then I just recompile the new revisions using the make command.
nwagenaar
 
Posts: 32
Joined: Tue Jul 30, 2013 3:19 am

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby nwagenaar » Mon Feb 09, 2015 4:28 am

Talking about new versions. I compiled the latest git of both tvheadend and oscam. Grab them from here:

TVHeadend: http://shalafi.home.xs4all.nl/moi/20152 ... bs2.tar.gz
OSCAM: http://shalafi.home.xs4all.nl/moi/20150 ... bs2.tar.gz
nwagenaar
 
Posts: 32
Joined: Tue Jul 30, 2013 3:19 am

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby deffcon » Wed Feb 11, 2015 4:41 pm

Niels,


Thnx, I will try to use you're config for Buildroot and i will let you know about thse versions you've compiled !


Thnx Again

Dave
deffcon
 
Posts: 8
Joined: Thu Sep 15, 2011 10:29 pm

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby deffcon » Mon Feb 23, 2015 3:55 am

Niels,

When you compile new version of tvheadend, can you inguiry the buildnumbers in the version on behalf on the changelog ?

Groet ;-)

Dave
deffcon
 
Posts: 8
Joined: Thu Sep 15, 2011 10:29 pm

Re: TVHeaded 3.9 latest GIT for MOI DVB-S2 Streaming Box

Postby krement » Tue Jun 09, 2015 10:36 pm

Hello, I use your lasted build, it's very fine, thanks. I have one problem, in oscam I can't connect tout a cccam server. My config file are the same I use with oscam on Raspberry pi. I don't understand what's the problem. Do you have a idee?
krement
 
Posts: 2
Joined: Tue Jun 09, 2015 5:25 pm

Next

Return to Software

Who is online

Users browsing this forum: No registered users and 2 guests

cron