Hi,
Using the latest available Linux drivers and I also cannot get the remote to work.
you say here "
while i don't have ready configuration file i believe it should be very easy to prepare one - first run lirc like this:
lircd --driver=dev/input --device=/dev/input/eventX
where X is what is listed in your 'dmesg' output as the number for TBS8920 IR input device."
What number do i use? here is a copy of my "dmesg | grep cx88"
[ 16.967734] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 16.968083] cx8800 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18
[ 16.969658] cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1
[ 16.969660] cx88[0]: TV tuner type 4, Radio tuner type -1
[ 17.050467] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
[ 17.485093] input: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:08.0/0000:01:09.0/rc/rc0/input5
[ 17.485147] rc0: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:08.0/0000:01:09.0/rc/rc0
[ 17.485153] cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 18, latency: 64, mmio: 0xf9000000
[ 17.485207] cx88[0]/0: registered device video0 [v4l2]
[ 17.485225] cx88[0]/0: registered device vbi0
[ 17.485281] cx88[0]/2: cx2388x 8802 Driver Manager
[ 17.485299] cx88-mpeg driver manager 0000:01:09.2: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18
[ 17.485306] cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 18, latency: 64, mmio: 0xf8000000
[ 17.495136] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[ 17.495139] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 17.495142] cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
[ 17.495145] cx88[0]/2: cx2388x based DVB/ATSC card
[ 17.495146] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 17.498071] DVB: registering new adapter (cx88[0])
Any help is appreciated as so far i've got mythtv working with channels configured and now all i need is the remote to work and my pvr experience will be complete