Hello I have purchased a new TBS6985 quad DVB-S card from you guys and installed the driver like the README says but it was a mess. I am running Debian Wheezy latest version and had already installed HDHomerun and and old Hauppage PVR 500 card. Both were working perfectly BEFORE I installed you drivers. I did not know that it would install every single driver in the driver pack and now my whole OS is corrupted. My HDHomerun does not work anymore and my Hauppage card is not even listed. I am using TVHeadend as my PVR back-end server. Everything was working perfectly BEFORE I installed your drivers and now nothing works. I backed up my old config of TVheadend and I have already installed a new Debian OS and reinstalled tvheadend and I am back to the same place I was BEFORE your drivers messed up my entire OS. All I want to do is either have precompiled drivers and firmware for a 64bit system or compile the drivers ONLY for the TBS6985 card and not the entire product line against MY KERNEL like it did for HDHomerun. I have noticed that the drivers for this card are listed as tbs6985fe_driver.o and tbs6985se_driver.o and I believe the firmware is v4l-cx23885-avcore-01.fw however I'm not sure on the firmware part. I need a simple detailed howto compile against my own kernel so that it will not mess up my OS again or precompliled drivers that I can download. I have seen this howto but it does not apply to the TBS6985 https://shop.tbsdtv.com/blog/how-to-insta ... 11-04.html
Please help as I cannot use this product without messing up my current config.