Hello everybody,
I recently discovered that my TBS5922 does not properly tune all available transponders.
From attached CrazyScan 1.0.1.96 reports, you can see that:
1. 13.E Hot Bird: many transponders are missing for high band - vertical polarity;
2. 19.2E Astra: same thing, missing transponders for high band - vertical polarity;
3. 19.2E Astra: signal level for low band - horizontal polarity is extremely low.
About points 1-2, it is not just CrazyScan: DVBViewer 5.2.0.0 does not tune any channel
on the missing transponders too.
I can tune and watch missing channels with a standalone receiver (Jepssen JS-4000 PVR),
so this is definitely an issue with TBS5922.
About point 3, maybe the LNB is broken -- frankly I did not check this with the JS-4000.
Any idea why this is happening? I am using a Ku-Linear LNB setup on TBS5922
(LOF1 9750 MHz, LOF2 10600 MHz, LOF Switch 11700 MHz) and the "universal LNB"
setting on JS-4000.
Acer Revo RL100 with Windows 7 SP1 64-bit, TBS5922 BDA driver version 2.0.3.2.
Any help would be greatly appreciated!
Ferruccio