by diabloss » Mon Nov 24, 2014 11:04 pm
Greetings
You have tried the USB memory stick method?
There are two methods of software update , one with the flashing tool and the second with the usb stick.
In order to make your cards visible in the console before you flash firmware you need to rename certain file
DiD you rename the DVB-C uimage file from \Profiles\MX6Q Linux Update\OS Firmware\files\ ???
if you flashed incorrectly your MOI is normal it won't detect your card.
so basically when you unpack your firmware files you should look in this path \Profiles\MX6Q Linux Update\OS Firmware\files\
there should be a file which have in the name DVB-C uimage ... rename it to uimage simple overwrite if ask and then flash your moi pro.
in that path ( \Profiles\MX6Q Linux Update\OS Firmware\files\) you should have 2 files named uImage_fsl_dvbt or uImage_fsl_dvbc .. .
One of them is for terestrial + satelite second is cable + satelite. rename one to uimage and overwrite file if ask and then use the MFG tool to flash your MOI Pro.
Make sure the button from behind is in burn position when you flash or else nothing will happen.
Thanks