mjahabarsadiq Wrote:crazycat Wrote:check latest test build StreamReaderEx-BDA
LNB voltage forced 18V before Diseqc cmd (DiSEqCHV option in streamreader.ini).
Thanks bro! I will try this once I am home
..
Hi Bro,
I tested but results is same.
Try 1:
Diseqc 1.1 = Port 7
Diseqc 1.0 = Port 2
Multi Switch = False
Set Diseqc = Success
RF Scan Status = Success
Blind Scan Status = Success
Try 2:
Diseqc 1.1 = Port 7
Diseqc 1.0 = Port 1
Multi Switch = False
Set Diseqc = Success
RF Scan Status = Success
Blind Scan Status = Failed
Failure Details: Diseqc 1.1 is automatically switching to Port 1 while starting Blind Scan. Attaching the screenshot where you can see RF scan found frequencies at Vertical polarity after 11700 whereas Blind scan is finding before 11700. I am also attaching DVB Dream Device options settings since DVB Dream is working fine no matter in what order I am switching the LNBs.
Let me know if any other logs required.
Crazy Scan Exported Image
DVB Dream Device Settings
Thanks,
Sadiq