by mjahabarsadiq » Thu Sep 15, 2016 6:23 pm
Hi,
I am also using TBS5990. I am using CrasyScan and EBS Blind Scan Pro tools with this device. Blind scan is working perfectly.
But I am having a problem when I am having DiseqC 1.1 and 1.0 connected together.
For example, I have an LNB connected to port 2 of Diseqc 1.0 and output of 1.0 is connected with port 7 of Diseqc 1.1. When I select this setting in EBS Blind Scan or in CrazyScan, it is not reading from the desired LNB. Instead it is reading from some other LNB.
I even have connected a monoblock LNB to port 1 of Diseqc 1.1. The monoblock is having built-in Diseqc 1.0 and so I am selecting it and now it is working fine.
Both monoblock and 1.0 + 1.1 setup are working fine in DVB Dream and also in my set top box.
Additional information. I am actually using 4x1 Diseqc 2.0 as Diseqc 1.0 and I hope that is not the problem here.
Please help me to sort out the problem.
Thanks,
Sadiq