Moderator Control Panel ]

blindscanning issues

blindscanning issues

Postby tasoss » Sun Sep 10, 2017 4:15 am

Hello.
I have tried the following scenarios(all on the same satellite)
1)Using tbs 6903
adapter 0 -> bscan2
adapter 1 ->bscan

2)Using tbs 6908
adapter 0 -> bscan2
adapter 1 ->bscan

After a few hours bscan2 can't find any transponders.But bscan1 continues to work correctly.
If i stop bscan2 and restart it , it will start working again.
If i run bscan2 alone then i haven't seen any problems.
Do you have any suggestions?

Thank you very much!
tasoss
 
Posts: 11
Joined: Sat Jul 22, 2017 7:14 am

Re: blindscanning issues

Postby steven » Mon Sep 11, 2017 11:31 am

Hi

Do you mean you always on scan with TBS BSScan tools ? after a lot of times scan it stop working ?

Thanks

Kind Regards

steven
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Re: blindscanning issues

Postby tasoss » Mon Sep 11, 2017 2:45 pm

Hello.
I should have mentioned that i use crazycat's blindscan with loop=1.
:)
tasoss
 
Posts: 11
Joined: Sat Jul 22, 2017 7:14 am

Re: blindscanning issues

Postby steven » Mon Sep 11, 2017 3:06 pm

Hi tasoss

Thanks for your update : )

Maybe write an script let crazyscan auto closed and running every 1 hour

Thanks

Kind Regards

steven
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Re: blindscanning issues

Postby tasoss » Wed Sep 13, 2017 5:45 am

I agree although this is a dirty solution :)
Anyway thanks for answering!
tasoss
 
Posts: 11
Joined: Sat Jul 22, 2017 7:14 am


Return to Professional DVB-S2 Dual Tuner PCIe Card TBS6903

Who is online

Users browsing this forum: No registered users and 1 guest