actually, we also do provide use special device module for DVBDream and ProgDVB to provide optimal support for TBS products in these applications. so, let me give you more details sharing with you instructions i prepared for another customer:
=====
on the installation CD of your TBS 6980 there are modules that add support of the card to both ProdDVB and DVBDream including DiSEqC support. so, i suggest you to try setup your DiSEqC 1.2 motor in DVBDream first and so let me give you some more details how to do it:
it's very important to install DVBDream BDA Device Module - the "bda.dev" file that is found on the installation CD of your TBS 6980 card to DVBDream, because it adds support to DVBDream for TBS products.
so, you need to copy the "bda.dev" from the the installation CD of your TBS 6980 card to "Devices" folder under your DVBDream installation folder - and then start DVBDream, go to Options menu and choose "Positioner ---> Options ---> Enable Positioner", please, look at the following screenshots in the attachment:
- dvbdream_enable_positioner_01.png :
- dvbdream_enable_positioner_02.png :
and to finally setup the motor select the correct "H-H Motor Type":
- dvbdream_select_motor_type.png :
and if USALS will be in use or not - all these settings like "motor type", "USALS", etc, and how to use them should be covered by the user manual of your motor.
for ProgDVB the procedure is similar - on the installation CD of your TBS 6980 card there is device module for ProgDVB that adds support of the card to ProgDVB and you need to install it first.
=====
in case you lost your installation CD or for some reason those files are not found on your installation CD, i uploaded them here:
http://www.megaupload.com/?d=QMOQ6VA9