driver 1.0.1.9 errors

[someguy]

In TS mode lock OK

In GS mode not locked on same transponder, why?

[DVB]

That is not error. If transponder use Transport Stream not Generic Stream, You cannot lock it as Generic Stream, because it is not Generic Stream (if lock would be present - that would be error). One transponder cannot be TS and GS at the same time.

[someguy]

as I known TS and GS stream(streams) encapsulates in BB-Frames when transponder uses DVB-S2. may be it righter to record transponders containes TS-streams as BB-Frames, when selected mode is GS? older version of you driver & tbsrecord work as I wrote. in new version you removed that ability.

[steven]

Hi someguy

Next day,We will have a update about this problem.
and sorry about this.

Thanks

[steven]

Hi

Would you mind use this new driver to have a test.
here is the linker:
http://hotfile.com/dl/129690637/7eabf14 ... 1.rar.html
and send a test report here.

Thanks

[someguy]

thank you, Steven! i'll check your driver tommorow.

[someguy]

new driver works better! GS and TS streams captures in original BB-frame format, as I wished. but in end of captured files(about 100 kbytes) i see some garbage(fake bytes) ...

[steven]

new driver works better! GS and TS streams captures in original BB-frame format, as I wished. but in end of captured files(about 100 kbytes) i see some garbage(fake bytes) ...

Hi someguy
Would you mind have more test,and what about the older driver is it have garbage?
Thanks

[Ebrahimi]

I seem to be having some issues with the OEM DVD Dream v15e OEM software (Trial version of v15f from the DVD Dream website yields the same results.) While I have no issue acquiring lock in TBS Recorder or TBS IP, whever I start DVB Dream (with the exception of once where a manual scan actually returned data), it appears there is no signal (perhaps some sort of software config issue.) I do have the correct parameters set (I'm a long time DVB user and RF engineer with experience in Satellite comms) as well as the proper LNB Local Oscillator freq, etc. At times, I have been able to start TBS recorder or TBS IP, lock to a channel, start DVB Dream, and a signal be indicated which vanishes after any of the parameters (such as transponder frequency) are set.