TBSDTV Community Forum

steven Wrote:Hi which kernel you are using ?

Hi Steven,

Can we get patch into the code at some point?

It looks like the open source drivers also need this patch.

Attached is a patch to allow the code to compile with kernel versions before 3.18. Tested with - Card: TBS6981 Kernel Version: 3.13 TBS code: tbs-linux-drivers_v170330.zip Compiles and apparently works (meaning it works for me, but I've no idea if the affected code is normally executed or not on my ...

I'm using a TBS6981, modinfo cx23885 gives me: parm: enable_tbs_ir:Enable IR support for TBS cards (default:1) (int) You may need to specify a different module (in my case cx23885 ) in the modinfo command depending on your hardware. If your modinfo command is correct and you don't see the above outp...

The problem was caused by evdev (an input driver for Xorg) which was picking up the remote as a keyboard input device. This could be seen from my Xorg logs (/var/log/Xorg...), see below. Most of the buttons don't work by default because they don't naturally map to keyboard buttons, e.g. your keyboar...

Hi Roman, In short, my solution was to stop the lirc service and run the lircd command manually. Run the following to see exactly what command the lirc service is running: ps aux | grep lirc This should output something like this: root 1215 0.0 0.0 32304 680 ? Ss 12:46 0:00 /usr/sbin/lircd --output=...

Have it working now, will report findings in a day or two.

More detailed information - Linux mythbox 3.0.0-13-generic #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux I get the following output in my syslog when I start lirc: Dec 9 17:48:53 mythbox lircd-0.9.0[4581]: lircd(devinput) ready, using /var/run/lirc/lircd Dec 9 17:48:54 my...

Hi Sergio, As I said above 1) I tried following the settings given by bickcat Originally, with lirc installed, I used the settings given by bickcat (which as you can see from the link includes hardware.conf and lircd.conf, follow the link in my last post if you need to see those settings). 2) I have...

On 64-bit Mythbuntu - I tried following the settings given by bickcat , but the remote would ONLY get a response from the machine when the lirc service was stopped! (sudo service lirc stop) Even then the only buttons that worked are: Mute, Numbers and Arrows. I have since reinstalled Mythbuntu, this...