TBSDTV Community Forum

Any update on this?
It's okay if it's still beta!

Hi, I would like to have the complete kernel source and configuration file the kernel of MOI+ Or at least a description of how the kernel was built for both the DVB-T/S and DVB-T/C Kernels There are issues with some recent USB-SATA conversion chips that make some external USB 2.0 harddisks not getti...

Any update on this issue?
Did you give up or found a workaround/solution? Did you try windows and different hardware?

I appreciate your help a lot. But I seem to be getting the same results as before. dB values are 11.8-12.0dB dvblast gives warnings, perhaps a bit less than before. Some are directly after tuning (Disecq switching side effect?) and go away, then it's a batch of 1-5 lines every x minutes warning: tra...

that actually indicates massive corruption. please, run more simple DVBlast command line: dvblast -c dvblast.conf -f 12721750 -s 22000000 -v 18 -a 1 and paste your output from it here again. thanks. in the meantime i will try to reposition one dish to Astra 19.2 and test on the same signal and prov...

what you've done with sasc-ng doesn't answer anything, because it could be your smart-card reader is not set properly, i.e. it causes delay/lag in the keys, which leads immediately to picture (and sound) corruption. also, that doesn't rule out problem with what displays that video/audio data like c...

Okay update. I managed to get a working configuration using sasc-ng and a smartcard reader. I can watch encrypted channels without the CAM. The corruption is still there. using scan-s2 I see ber almost always zero and when it goes higher (values around 100) , the unc (uncorrected blocks) is still 0....

Can you give me a pointer on how to analyze a TS stream without decrypting it ?
I can record encrypted ts packets with szap-s2 -r and then dd from /dev/dvb/adapter0 but how to figure out they are corrupted?

And me too.
Would help a lot in my testing if I can clear out the CI interface

I have tried different interrupt settings, no improvement. I also tried options dvb-core dvb_demux_speedcheck=1 syslog shows me [ 6298.841141] TS speed 61867 Kbits/sec [ 6299.427149] TS speed 61867 Kbits/sec [ 6300.021251] TS speed 62287 Kbits/sec [ 6300.607240] TS speed 62287 Kbits/sec [ 6301.20951...