Hi,
I have just bought TBS 6980 card and I'm trying to set it up. I'm using DVBViewer to watch satellite channels on my PC. The PC configuration is:
Asus P5B-Deluxe motherboard
4GB of RAM
Widnows 7 x64
I used Skystar 2 before, using a splitter for the LNB signal, for watching both on a set-top box and on PC. It worked perfectly, of course on SkyStar 2 I watched channels only on the same polarisation of the set-top box channel. In DVBViewer I configured the LNB as "Shared LNB". When I used Skystar directly connected to LNB it worked also.
But for TBS 6980 it did not work. When I use TBS 6980 with splitter and together with the set-top box, then it is ok. I watch channels on the same polarisation as the box. But when I use TBS 6980 as directly connected to LNB, it does not power on the LNB. I have plugged in all 3 power cables of TBS 6980 to my power supply, but no effect. How can I tell TBS 6980 to power on the LNB?
Thanks for your assistance!