by jimlas53 » Fri Sep 10, 2010 1:14 am
I wound up re-installing the OS, rebuilding and installing the drivers, and I've run szap-s2.
Here are the results:
./szap-s2 -c channels.conf -p -r -S 0 "HEST" -l 10750,10750,11700
reading channels from file 'channels.conf'
zapping to 1 'HEST':
delivery DVB-S, modulation QPSK
sat 0, frequency 12060 MHz H, symbolrate 26700000, coderate auto, rolloff 0.35
vpid 0x04ba, apid 0x04b0, sid 0x000c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
opening frontend failed: Permission denied
modinfo shows this:
modinfo tbs6981fe
filename: /lib/modules/2.6.32-25-generic/kernel/drivers/media/dvb/frontends/tbs6981fe.ko
license: TurboSight Proprietary
author: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
description: TurboSight TBS 6981 Dual DVBS/S2 frontend driver module
depends:
vermagic: 2.6.32-25-generic SMP mod_unload modversions 586
parm: pne:Phase noise enhancements 0:Off, 1:On (default:0) (int)
parm: esno:SNR is reported in 0:Percentage, 1:(EsNo dB)*10 (default:0) (int)
parm: dbm:Signal is reported in 0:Percentage, 1:-1*dBm (default:0) (int)
To get around the permission problem:
sudo szap-s2 -c channels.conf -p -r -S 0 "HEST" -l 10750,10750,11700
reading channels from file 'channels.conf'
zapping to 1 'HEST':
delivery DVB-S, modulation QPSK
sat 0, frequency 12060 MHz H, symbolrate 26700000, coderate auto, rolloff 0.35
vpid 0x04ba, apid 0x04b0, sid 0x000c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
The program never shows any further info until I kill it with ctrl-C