[ Moderator Control Panel ]
by satdude » Fri Aug 12, 2011 9:05 am
I have my C-band lnb connected to port A(0Khz) and Ku-band lnb connected to port B(22Khz). I installed the tbs 6920 driver v1.0.5.0 and my channels on C-band work but none of my channels on Ku-band work. I rolled back the driver to v1.0.4.1 and both my C-band and my Ku-band channels work.
-
satdude
-
- Posts: 6
- Joined: Sat Jun 05, 2010 2:02 pm
-
by steven » Wed Aug 17, 2011 11:20 am
Hi
Thanks for your test report.we will check it later
Thanks
-
steven
-
- Posts: 2239
- Joined: Fri Aug 06, 2010 3:23 pm
-
by satdude » Thu Aug 18, 2011 7:05 am
I installed the driver and restarted my computer. This did not fix the problem. I am using Vista 32bit.
-
satdude
-
- Posts: 6
- Joined: Sat Jun 05, 2010 2:02 pm
-
by steven » Fri Aug 19, 2011 2:08 pm
Hi
Would you mind tell me which player you are using,and give your LNB setting's picture,like you are use 22k to change LNB
Thanks
-
steven
-
- Posts: 2239
- Joined: Fri Aug 06, 2010 3:23 pm
-
Return to Windows
Users browsing this forum: No registered users and 1 guest