pjm Wrote:The 22khz setting being missing from the applications is very strange, all of the satellite receivers I've ever used support it.
what 22khz setting you're talking about - i really don't understand, because 22 kHz is used to
1) switch between low/high band for Universal LNBs
2) for sending DiSEqC commands
all application that support DiSEqC has 2) in some form and 1) happens automatically when Universal LNB is set as the LNB type in the application and before high-band transponder is tried to be acquired the application send request to the driver to turn on the 22 kHz tone output
pjm Wrote:The remote IS working in Windows Media Centre, so its strange that TBSViewer doesn't see it?
i have no idea - maybe, i should check it by myself it could be some bug in the recent versions of TBSViewer.
pjm Wrote:I'm not really worried about TPS IP, but whatever the problem is you should look at fixing it.
that definitely need to be checked, because from your screenshot it seems something failed in TBS IP tool.
@jw300 and BluetoothBG
i don't know what kind of multi-switch device pjm owns, but at least DiSEqC multi-switches that have four different inputs for VL,HL,VH,HH doesn't operate in such simple way as you're suggesting and they in fact use DiSEqC commands to select between VL,HL,VH,HH ports, i can give you for example Kathrein EXR 2998 DiSEqC multi-switch, because it has good documentation available online:
http://www.kathrein.de/en/sat/products/doc/9363280b.pdf
and you can check page 5 of the above document to see what i mean about the DiSEqC commands. in any case i believe it depends mainly on the particular device in use and it's not some general rule.