I have recently bought the TBS6981 to be used with TVSource. The setup has gone quite smoothly with one exception, some of the transponders intermittently do not get a signal.
When doing a channel scan for TVSource I selected all transponders, however a selection of the channels I wanted were not showing. I rescanned and a few more appeared, but still some missing. I tried individual transponders for specific channels I wanted and some, on retrying, found a signal and the channels, but not all. I discovered that the transponders file was out of date so updated this, but still some missing.
I discovered the new bdadev file looking on the dvblogic forums and this allowed me to detect the remaining channels I wanted, but only after a few retries scanning those transponders.
Now everything is configured I get the same symptoms whehn I try to view channels as when I was scanning. When changing to these problem channels intermittently I get the DVBLink error screen with no signal or hardware fault. If I change to another channel and come back it will sometimes work or sometimes I have to do this a few times.
My previous build used 2 Hauppauge DVD-S2 cards and I did not have this problem so I think the cables and dish are OK. Can anyone offer some advice on what to do next? Do I have a faulty card?
Thanks in advanced for any assistance.
Win7 64bit, TVSource 3, Driver 2.0.0.5