TBSDTV Community Forum

Hi, sorry for late reply, haven't visited IPTV stuff for a while. In my setting I used 100ms for diseqc messages and 5ms for unicable messages to make it work. But that depends on your diseqc/unicable switch, etc. Typically you should be able to either play a bit with the delay within the source cod...

.... initialisation; also tvheadend in Configuration > DVB Inputs > TV adapters shows: "ca0: CAM tivusat CI+ (module ready)" .... Regards, Andrea Hi Andrea, I'm not an expert but what about the CI+ issue, the slot of the TBS6590 is not a CI+ slot (only CI) - could that be the problem? If ...

Hi,

I guess its a timing problem of the driver, seems TBS6590 is very sensitive to timing between diseqc commands. Since I'm not working with dvblast you should try out different tools, like mumudvb if you can get a lock.

klaus

Hi steven,

thanks for the offer - I double checked with dvblast - problem is the timing between diseqc-commands. dvblast waits 100ms, if i set that value within mumudvb i get also a lock.
thx,
klaus

Hi steven, yes indeed and if you read the mumudvb manual than you would see that itis exactly what the tuner-parameter is meant for - setting the correct frontend-value mumudvb -l gives you: Info: DVB: ================================== Info: DVB: DVB CARDS LISTING Info: DVB: =======================...

I set module (frontend number) with tuner=1 for mumudvb, otherwise it wouldn't work at all: Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20180909_mumudvb2 is starting ========== Info: Main: Streaming. Freq 11373000.000000 Info: Tune: Using DVB card "TurboSight TBS 6590 DVB...

Hi, I have a configuration for mumudvb to fetch a transponder from Hotbird S13E0. This configuration works for TBS6909 which is also connected to a DiSEqC switch. But when I apply the configuration to the TBS6590 card no signal is found? delivery_system=DVBS2 TBS6590: card=0, tuner=1 TBS6909: card=4...

Dear Jenny,

is it possible to capture and stream a 1920x1080p stream with 60fps from all HDMI input channels. The documentation is a bit confusing since its claims to be able to capture 1920x1080p but also to be limited to 1920x1080i. Please clarify.

Many thanks in advance.
Klaus