Search found 13 matches

Return to advanced search

Re: card stops working - freezes

I have stopped MP completely and left tbsviewer running for nearly 24 hours (pip) - it worked. So the latest "evidence" is that if the card is switching a channels it will eventually freeze. This is supported by 1) using MP and an extended recording schedule the MP log shows the tuner bein...
by kevin
Fri Oct 28, 2011 1:59 am
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

Re: card stops working - freezes

yes the Hauppauge has been removed soon after fitting the tbs6891 as the tbs6891 just wouldn't work with it installed - I replaced it with a USB DVB-T receiver (peak) which appeared to work. However since encountering the most recent problems that has also been removed. I have no other cards install...
by kevin
Thu Oct 27, 2011 3:08 am
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

Re: card stops working - freezes

an interesting overnight test. I set the system up to record on and off all night but without the system suspending down between recordings. All appeared Ok - I got 7 recordings but number 8 broke it. The card just didn't tune -so the next 8 recordings failed. The machine never switched off and was ...
by kevin
Wed Oct 26, 2011 1:54 am
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

Re: card stops working - freezes

I am a little closer to the problem. It appears that once the card gets into the failing state it may allow recording but it then stops providing data after around 1min and 10secs. MP does not detect any problem but the recording is short - 1min 10sec. I have now decided to stop the m/c going into s...
by kevin
Tue Oct 25, 2011 3:47 am
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

Re: card stops working - freezes

I have removed the possibly conflicting dvb-t card (peak usb) and set up a whole sequence of recordings separated by sufficient to cause standby before the next recordings. They all fired but only the first few really worked (i.e. the whole program was recorded). The later ones recorded but only the...
by kevin
Mon Oct 24, 2011 4:36 am
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

Re: card stops working - freezes

yes I have updated to the latest driver. Some further information . The problems may be related to having another card in the box - a problem I have seen and others have also reported a number of times I replaced a Hauppauge PCI card soon after buying the TBS card as they would not coexist - the TBS...
by kevin
Sun Oct 23, 2011 4:41 pm
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

card stops working - freezes

I have been struggling with this card, which I bought to replace a compro card, for around six months - it nearly works but............. I thought there were two problems but it looks like they are really different manifestations of the same one. Most noticeable is the failure to record (I use Media...
by kevin
Sat Oct 22, 2011 3:45 pm
 
Forum: Windows
Topic: card stops working - freezes
Replies: 10
Views: 8983

Re: No signal after resume from sleep

Hi, I believe I am suffering the same problem. I use MediaPortal and sometimes when the PC restarts to record the recording appears to work from an MediaPortal view (i.e. it logs that it is recording BUT the file produced is small and not valid. Other times when I just want to use MediaPortal to vie...
by kevin
Fri Oct 21, 2011 4:18 am
 
Forum: Windows
Topic: No signal after resume from sleep
Replies: 21
Views: 21205

Re: interaction with other cards

The Hauppauge uses a VIA USB chip on the PCI card with their USB devices(DVB_T chip) on the USB

I didn't think the TBS had a USB chip on the PCIe card so I don't quite understand. Bottom line I suspect a driver interaction issue.

cheers
by kevin
Wed Jul 27, 2011 4:04 am
 
Forum: Windows
Topic: interaction with other cards
Replies: 4
Views: 3704

Re: interaction with other cards

The card in question is a Hauppauge NOVA-T-500 (dual DVB-T card). (its a PCI card with two DVB-T receivers hanging off a USB interface) I now have a Peak USB card (dual). This appears to work OK but I am still having some problems with timed recordings. Not all are completing and this may be due to ...
by kevin
Wed Jul 20, 2011 4:59 am
 
Forum: Windows
Topic: interaction with other cards
Replies: 4
Views: 3704
Next

Return to advanced search