Ok, thanks. Maybe this can be implemented in the future ? I don't know if STBs support CEC but if they do channel switching can be done by selecting different URLs from the encoder ?
I wonder if the HDMI signal comes from a standard DVB STB and a channel change occurs, is there a delay before the new channels gets streamed ? This box can't control the STB via IR or HDMI CEC ?
Hello It seems that we have exactly the same problem but I'm using the TBS6285 Quad card. http://www.tbsdtv.com/forum/viewtopic.php?f=153&t=9275 Can't lock on 570 MHz (Brudaremossen) using T2 mode. Also have LTS 14.04. Have you find any solution ? I have tested many things: 1) Attenuators in fro...
Ok, I think it supports T2. I manage to lock on another mux, much more distant also transmitting in T2 mode :) . All my other cards and sticks don't have any issue to use the closest one at 570 MHz but this card seems to have some problems. I will check tomorrow in more detail. I have checked before...
Ok, Mux1 is "T", Mux6 is "T2" thats for sure. With the following config file: [MUX1] DELIVERY_SYSTEM = DVBT2 FREQUENCY = 546000000 BANDWIDTH_HZ = 8000000 MODULATION = QAM/64 TRANSMISSION_MODE = Auto [MUX6] DELIVERY_SYSTEM = DVBT2 FREQUENCY = 570000000 BANDWIDTH_HZ = 8000000 MODUL...
Ehh. How to do the config file !? I though I could specify delivery system for every MUX !? [MUX1] DELIVERY_SYSTEM = DVBT FREQUENCY = 546000000 BANDWIDTH_HZ = 8000000 MODULATION = QAM/64 TRANSMISSION_MODE = 8K [MUX6] DELIVERY_SYSTEM = DVBT2 FREQUENCY = 570000000 BANDWIDTH_HZ = 8000000 MODULATION = Q...
Ok, the binaries for dvbv5-scan were old (v1.0.1) so compiled new ones. V 1.7.0. But still problems with T2. muy@server1:~$ ./dvbv5-scan -a 3 dvb.conf Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet). Scanning frequency #1 546000000 Lock (0x1f) Signal= 99.95% C/N= 99.95...
Ok. I have the following conf file [MUX1] DELIVERY_SYSTEM = DVBT FREQUENCY = 546000000 BANDWIDTH_HZ = 8000000 MODULATION = QAM/64 TRANSMISSION_MODE = 8K [MUX6] DELIVERY_SYSTEM = DVBT2 FREQUENCY = 570000000 BANDWIDTH_HZ = 8000000 MODULATION = QAM/256 TRANSMISSION_MODE = 32K And the result from muy@se...
Hello How do I test T2 functionallity ? I'm using Tvheadend with this card but can only get DVB-T working, no T2. As I understand scan does not support T2 ? I did some test with dvbv5-scan but I don't really get any good readable results. Maybe my configuration file is wrong. I'm using LTS 14.04 (up...
kvaster Wrote:I'm suffering from this issues also. The only difference is that it's all OK with hd channels in case I disable all adapters except one. Please help to fix the problem...
How do you disable three tuners and just use one ?