TBSDTV Community Forum

Hi I see it states that this card has unicable support. How do you connect, and is it unicable 1 or 2 it supports? I find no documentation about use of unicable with the user manual for this card. Preferrably I like to connect just one cable to input 0 and use all 8 tuners like other card made possi...

I was just going to install samba on the Centos 7 image on the Moi Pro-AMD. I then happened to see something strange - I could already access the root of the unit using smb with no password and no user login. I made sure samba was not installed and this was still possible. Does the image that come w...

Some further research lead to additional info that might be useful to others moving to Ubuntu 16.04: " Since Ubuntu kernel 4.4.0-20 the EFI_SECURE_BOOT_SIG_ENFORCE kernel config has been enabled. That prevents from loading unsigned third party modules if UEFI Secure Boot is enabled. Since Ubunt...

Thank you so much! That fixed it!

I installed the drivers as described and did some troubleshooting - removed, reinstalled again. lspci lists the cards, but there is no result of dmesg | grep frontend: 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31) 02:00.0 Multimedia controller: TBS Technologi...

Hi, I am looking at det back of my Moi Pro AMD which has four cards in it.
The cards themselves are labeled 0,1,2,3 for their inputs, but I dont know how to tell which card it is.

Can you please give me advice on numbering on the cards for the DMESG FRONTEND output?

Thanks

So after playing around with it for a bit I figured the drivers had to be reinstalled, but also the lib files had to be removed: Issue this command to check the cards: dmesg | grep frontend It should give you a heads up, on my install the tuners were first missing, but after running: Unzip and tar t...

After running yum install update all my cards are gone from tvheadend. I suspect the kernel got updated and now the drivers for the card are not initializing anymore. Is there a quick fix for this? Please let me know the procedure for fixing this issue? With similar issue in Ubuntu I had to recompil...

Thank you for your reply, could you tell me what config file is modified for startup of ticking off oscam?
Also what other config files are used when the moi pro starts?

I was looking into tsdecrypt myself earlier cause I wanted to use it together with dvblast.
However I found that mumudvb and dvbapi with oscam was a much easier, better and more stable way to go about multicast (or unicast) dvbstreams.