TBSDTV Community Forum

HI Steven,
I installed the new TBS sources today and notice that with both the 6925 and 8922 I no longer have a signal or quality reading. Where those used to be I now have Signal: Unlocked
Everything seems to run normally other than that.

If the Openbox and 6925 are run through a switch(either DiSEqC or 22khz) take out the switch and connect the 6925 straight to the lnb, there are switches that don't work very well at all. Maybe you are running the 6925 from the loop out on the Openbox? That may not work well either, run the 6925 str...

Do you have enable the goto x method?This is done by software.If you want to lock another satellite's transponder it will send the motor diseqc first then lock the transponder if you can not get lock ,maybe DVBViewer have not send the lock signal to our driver. I am using DiSEqC1.2 positioner, I ha...

I'll have to retract at least part of the good news. With the new driver Dvbviewer will lock frequencies after a satellite move but it seems to only work if the satellite moved to is close the the previous one. If I select a channel from a satellite at the opposite end of the the arc from my positio...

Steven, Software like Dvbdream, Dvbviewer and Progdvb have a retune on missing signal setting but control of the program is lost by the user during re-tuning, almost like freezing although it is released eventually. If there happens to be no signal on the chosen channel, the program will repeatedly...

Same situation with TBS 8922

Steven, Software like Dvbdream, Dvbviewer and Progdvb have a retune on missing signal setting but control of the program is lost by the user during re-tuning, almost like freezing although it is released eventually. If there happens to be no signal on the chosen channel, the program will repeatedly ...

works now with my 6925 and 8922

No change from previous version, still won't scan H frequencies when pol: ALL. However, I"ve found if I choose LNB type = ku-circular and change lof1 to 5150 then both V & H C band frequencies are scanned correctly when pol: ALL is selected

Thanks for your test report. :) And would you mind have test just scan the H pol with the same input setting,to check the single scan whether is ok. because i just have a test if select pol:ALL it can scan both H and V. Yes, when pol=H is selected then horizontal freq scan is fine, the problem is w...