TBSDTV Community Forum

Hi

The GSE packet head should be not 0x47, most is 0x42.
You can use the TBSrecord tools to record the GSE stream.

Best Regards

Hi
sorry , there is not script support it.
i have look at your describe , when your signal disappears ,you use the tool reset to dvb-s/s2 mode, right? if you want to restart the box, just need unplug and plug the usb port.

Thanks
Best Regards

sorry, we are already testing this mode , if make sure it can be work stable with this mode , we will update it on the next update.

Thanks
Best Regards

Hi
maybe you can try add a LNA to enhance the signal strength.

Best Regards

Hi
Does this error affect its work?

Best Regards

Please update the latest version.

Hi
I have seen the vedio.The snr is really changing in real time. because the signals are affected by various extemal environments.
Is the streaming function work fine?

Thanks
Best Regards

HI Whether your signal cable is connected to other loads,except the diseqc? such as multiswitch. if it has,maybe this is the problem. because the driving ability of 5520se sending the 22k is weak. so advise, the signal cable do not through any other loads. direct connet the lnb and diseqc. Best rega...

HI
You can not using this way install the drivers into a Raspberry Pi 3 system. you need using the cross-compiled. compile the drivers into the image of the Raspberry Pi 3.

Thanks
Best Regards

Hi,
1) the card using a switch component to change the recevice dvbt and dvbs signal circuit.

2) the change mode tool use for change the demod status. if you want recevice the dvbt/t2 signal, need make demod on the dvbt/t2 mode.


Best Regards