TBSDTV Community Forum

Hi Derrick and sotos65 would you mind set like this put LNB frequency value with your high band.do not use input setup. Thanks You must be joking.. I need diseqc! Without setup, no tuning of low band channels from other satellites either. Without setup I can only tune to low band channels of astra ...

steven Wrote:Hi Derrick

Would you mind give us more information,which transponder you are scan...

..as I told you all high band transponder fail cos there is no 22KHz tone signal. I've checked this with a scope.

OS is XP professional

I don't set 22khz manually. I use the input setup of tsreader for a universal LNB. With TBS 8921 high band channels are tuned after the 2nd attempt (bug reported long time). With TBS 6925 high band channels are never tuned cos the 22KHz signal is never switched on!!!

..like most of the software tools provided by TBS the source file TBS6925.dll is buggy. I can only tune to low band channels because 22KHz is missing

You have to select first a single multiplex with TBS6925-TSRecorder (or crazyscan). Then you can perform a scan with your favorite application but for the corresponding mux only!

..look at the lower left corner of your screen shot: There it says: Cursor Pos: Press left mouse button in plot region

thx, that looks better

FrameLength and Spectrum are working now but Spectrum ist wrong! IQ_Swapped should read Normal and vice versa (same is true for CranzyScan)

Thanks, diseqc 1.0 is working now properly

could you please fix the graphics (middle of the window)



apparently the newly added framelength and spectrum is causing trouble.

Spectrum seems to be a fake because it always reads IQ-normal

btw. there seems to an error in crazyscan's reading of "spectral inversion" (swapped IQ). It has to be the other way round. Transponders that are shown as "normal" are inverted and vice versa

..well, imho in most cases it's not ACM because it simply doesn't make sense. It's mainly used for vsat but for sure not for feeding a terrestrial DVB-T network.
The coding mode doesn't read ACM but ACM/VCM