hi everyone , i'm running openPCTV and i need to know the LIRC keymap of the remote . ther device works fine and the IR receiver gets recognized by the system,but i dont have the right keymap.
DRV_NAME="saa716x"
DRIVER="default"
DEVICE="/dev/lirc0"
---------------------------------
for i in /sys/class/input/input* ; do echo -n "$(basename "$i"): "; cat "$i/name"; done
...
input9: saa716x IR (TurboSight TBS 6982SE)
...
i run then
irrecord --device=/dev/lirc0 --driver=default -f /etc/lircd.conf
And here is what it recorded the program .
i needed first to give the button name (example KEY_CHANNELDOWN ) hold down the button on the ir remote than press enter in pc keyboard
Please enter the name for the next button (press <ENTER> to finish recording)
KEY_CHANNELDOWN
Now hold down button "KEY_CHANNELDOWN".
Got it.
Signal length is 3
and here is the result for all buttons
begin remote
name /etc/lircd.conf
flags RAW_CODES|CONST_LENGTH
eps 30
aeps 100
gap 108177
begin raw_codes
name KEY_MUTE
9054 2232 570
name KEY_POWER2
9032 2257 576
name KEY_EXIT
9031 2256 573
name KEY_1
9031 2259 574
name KEY_2
9029 2258 597
name KEY_3
9031 2258 544
name KEY_4
9030 2260 598
name KEY_5
9028 2260 572
name KEY_6
9030 2256 599
name KEY_7
9053 2233 599
name KEY_8
9057 2229 602
name KEY_9
9030 2258 574
name KEY_0
9028 2258 574
name KEY_BACK
9029 2257 575
name KEY_CLEAR
9029 2256 574
name KEY_AUDIO
9028 2258 572
name KEY_SETUP
9029 2256 574
name KEY_UP
9028 2258 575
name KEY_RIGHT
9029 2256 575
name KEY_LEFT
9025 2259 572
name KEY_DOWN
9028 2260 572
name KEY_BLUE
9027 2261 572
name KEY_GREEN
9054 2233 573
name KEY_YELLOW
9049 2257 575
name KEY_RED
9026 2259 573
name KEY_TV
9026 2259 570
name KEY_ZOOM
9059 2233 573
name KEY_FAVORITES
9027 2258 572
name KEY_MODE
9027 2257 573
name KEY_MENU
9027 2260 572
name KEY_EPG
9028 2255 602
name KEY_SUBTITLE
9030 2256 573
name KEY_ENTER
9027 2256 574
name KEY_RECORD
8990 2258 571
name KEY_PLAY
9026 2259 572 65430 198
name KEY_PAUSE
9023 2258 599
name KEY_STOP
9053 2231 574
name KEY_REWIND
9024 2257 598
name KEY_FORWARD
9022 2258 572
name KEY_FASTFORWARD
9024 2258 570
name KEY_PREVIOUS
9051 2232 576
name KEY_NEXT
9023 2257 571
name KEY_CHANNELUP
9025 2260 572
name KEY_CHANNELDOWN
9023 2256 575
name KEY_VOLUMEUP
9028 2254 599
name KEY_VOLUMEDOWN
9027 2255 573
end raw_codes
end remote
but even this dont works as it should.
Can someone send me the right lirc keymap.