True. Something is wrong and I will investigate.aidymp Wrote:SD Cards give the message MOUNTED! but cant find them!!
piotrasd Wrote:what about Bluetooth ? in Openelec
i get message - no adapter found (openelec settings - section bluetooth)
piotrasd Wrote:Also on MatrixTV i saw in dmesg IR connected to GPIO - on openelec nothing ...
OpenELEC:~ # lsusb
Bus 002 Device 005: ID 0bda:8179 Realtek Semiconductor Corp.
Bus 002 Device 004: ID 04f2:0200 Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
OpenELEC:~ # hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: 00:1A:7D:DA:71:14 ACL MTU: 310:10 SCO MTU: 64:8
DOWN
RX bytes:932 acl:0 sco:0 events:38 errors:0
TX bytes:158 acl:0 sco:0 commands:38 errors:0
Still other things need to be done.piotrasd Wrote:Maybe you can add package to openelec https://github.com/Freescale/gstreamer-imx
Failed how? You just need to download zip file, unpack, set switch on matrix, connect USB cable and click on correct batch file. And wait a minute or two. It's the same process as with matrixTV.Kestouf Wrote:Can you explaine me how to install OpenElec in my Matrix?
Because, I tried but failed
DLL version: 2.2.3
Thursday, August 14, 2014 11:32:09 Start new logging
ModuleID[2] LevelID[1]: Error: Can't find the specified list(SabreSD-eMMC-use-batch-file) in the xml file
ModuleID[2] LevelID[1]: Parse ucl script failed, error code: 12
Users browsing this forum: No registered users and 37 guests