Transponders missing

[DVB]

So when you want to connect 5927 - what are you doing? You have 1 cable, so 5927 needs to be reconnected.
Disconnecting MOI Pro during this?
MOI Pro is during this turned off?

For playing don't use VLC. Use Media Player Classic.

[Delta1Star]

I use a splitter, LNB in ​​/ 2 x out (moi pro & 5927). And don't disconnect anything, just see if the Moi Pro is the same as the 5927. but still nothing.

[DVB]

It is prohibited to use splitter for satellite setups.
Stop to use it right now or you will damage all your devices.

There is no possibility to split satellite signal, because on a Universal LNB band and polarity are selected by providing 13V or 18V and by sending 22kHz signal.
Now, by using splitter, you're making short circuit between 6985 and 5927 and you're on a very good way to burn one or both devices and damage both irreversibly.

If you did the same with SatLook - this explains your locking problems - SatLook changed band and polarity, which made 6985 to go wild and scan some random services from wrong parameters.

Satellite splitters can be used only on Unicable or Wideband setups (Wideband is not supported by TBS devices). All other usage will lead sooner or later to damages.

If you've got only one cable - connet it to MOI Pro, remove splitter
Then scan some frequency with FTA services.
Confirm frequency with Flysat if services are really FTA.
Select on FTA, select UDP and Streaming checkbox for this channel
Select Streaming&Save
Use PC which is in the same local network - open Media Player Classic and open URL, which will look like this:

Adjust IP address to your channel.

Must play. If not - check firewall.

[Delta1Star]

Can you do this;
Use PC which is in the same local network
Please clarify with a number of photos how to do it, because that is where the error lies, I see / notice. Because that explanation in the 1st PM does not work for me.

[DVB]

I've already showed you, that it's working easily:


You PC just have to be connected to the same router to which MOI Pro is, because devices have to see each other.
E.g. if you try to play from PC connected to other Internet source - it is not possible, because MOI Pro is available only on yout local network, not all over the Intrenet.

[Delta1Star]

I have the Kpn box 12 for internet and fiber optic from Sagemcom here, and I am building a network.
plan of approach ?!

[Delta1Star]

Pictures are clearer to me than words, if necessary with an indication via an arrow.
because I always have to translate

please ?!

Mvg

[Delta1Star]

when I have linked the Moi Pro to the PC I see: 169.254.103.13
When I have connected the Moi Pro to the Kpn Box 12 I see; 192.168.2.1
Haven't set anything up yet.
Which one should I get?!

The PC has: IPv4; 192.168.2.7

Mvg

[DVB]

Connect to KPN - it looks good then, because:
MOI Pro: 192.168.2.1 (although kinda low IP, often xxx.xxx.xxx.1 is reserved for the router, but maybe in KPN it is different, don't have KPN; whad address you have to type to enter into KPN Box settings? Hope not 192.168.2.1 )
PC: 192.168.2.7
Both devices are in 192.168.2.x - one lan network addressing - good.

And now play channels

I can do some pictures, but around the end of the week.

[Delta1Star]

Kpn box setting: http://192.168.2.254/ or this : http://mijnmodem.kpn/
hope it works

Mvg