More than 1 dvb/s/t/c in Matrix
6 posts
• Page 1 of 1
More than 1 dvb/s/t/c in Matrix
by dubaisatshop » Fri Aug 15, 2014 7:53 pm
Any idea about connecting more than 1 dvb-s/s2, dvb-t or dvb-c USB device to Matrix at the same time ?
- dubaisatshop
- Posts: 48
- Joined: Mon Jul 26, 2010 8:57 pm
- Location: Dubai, U.A.E
Re: More than 1 dvb/s/t/c in Matrix
by updatelee » Sat Aug 16, 2014 8:02 am
I use a USB 3.0 hub on a USB 3.0 port on my computer to run 4 DVB adapters off one port, works fine. Now the Matrix is USB 2.0 but still should have enough bandwidth to run 4, I just never tried it. Give it a go and report back.
UDL
UDL
TBS6925/5980, Prof 7301/7500/8000, Genpix Skywalker-1, Skystar 2 Express HD
Hauppauge 950Q, Kworld 330U/435v3/445v3
Dreambox 800
I use Linux and support open source projects.
Hauppauge 950Q, Kworld 330U/435v3/445v3
Dreambox 800
I use Linux and support open source projects.
-
updatelee - Posts: 374
- Joined: Wed Jul 25, 2012 11:48 am
- Location: CFB Edmonton
Re: More than 1 dvb/s/t/c in Matrix
by diabloss » Sat Aug 16, 2014 4:31 pm
i used on all 3 usb ports 2 suntek's tuners (cable + sat) and 1 TBS tuner ... all 3 were working fine , a bit of heat but were working fine.
- diabloss
- Posts: 147
- Joined: Thu Nov 22, 2012 2:51 am
Re: More than 1 dvb/s/t/c in Matrix
by dubaisatshop » Mon Aug 18, 2014 6:11 pm
diabloss Wrote:i used on all 3 usb ports 2 suntek's tuners (cable + sat) and 1 TBS tuner ... all 3 were working fine , a bit of heat but were working fine.
Is it mean can stream from 3 attached USB devices to different clients simultaneously?
- dubaisatshop
- Posts: 48
- Joined: Mon Jul 26, 2010 8:57 pm
- Location: Dubai, U.A.E
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 14 guests