Some BetaTesting :-)

[Cjcr]

Thanks for reporting Did you have the fan controll working or not? There is actually no published source for it so I don't know if it is part of the rootfs as program or some kernel modul...

Oops, I did not checked, but you can check yourself looking for a process called "fanmonitor" with top/htop. If the process is there then should work.

[Cjcr]

Kernel version (3.10.17) in our Matrix should be nice
http://boundarydevices.com/mx6-linux-ke ... 0-17-beta/

In theory their devices are very close to ours ...

[mijanek]

I got some issues on HDTV TS streams with my latest package so I upgraded to the latest build from smallint and now it looks good again

Here is the update I recommend..

@Cjcr sure, this is interesting, in fact the VPU backport is from that branch, but there is lot of missing, i.e. device drivers for networking, wifi, etc.. so still much to do for new kernel..

[mijanek]

there are nwe patches which should improve video decoding (and remove the remaining flickering spot in the middle of the screen with deinterlacing). I didn't test it yet but will do it later.

You may get it here.

I pushed my branch of sources I'm using for my environment here.

[Cjcr]

Hi @mijanek, looks like there isn't dvb tbs drivers for their devices (like tbs5925 I have got). Can you check it?

About fan:
The fan monitor daemon is running .. so it should work ...

Code: Select All Code

[root@matrixtv ~]# htop

  1  [|                                                              1.3%]     Tasks: 28, 6 thr; 1 running
  2  [|||                                                            3.0%]     Load average: 0.13 0.11 0.07
  3  [|                                                              0.7%]     Uptime: 00:10:50
  4  [|                                                              0.9%]
  Mem[||||                                                      44/1760MB]
  Swp[                                                              0/0MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
 5269 root       20   0  6424  1840  1108 R  2.0  0.1  0:00.26 htop
    1 root       20   0  4172  2608  1640 S  0.0  0.1  0:01.04 /sbin/init di0_primary
 1554 root       20   0 26500  4848  4672 S  0.0  0.3  0:00.50 /lib/systemd/systemd-journald
 2455 root       20   0  2588  1116   824 S  0.0  0.1  0:00.32 /lib/systemd/systemd-udevd
 2605 root       20   0  4888  1092   912 S  0.0  0.1  0:00.02 /usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u
 2612 root       20   0  8536  1768  1256 S  0.0  0.1  0:00.09 /usr/sbin/nmbd -F
[color=#BFFF00] 2631 root       20   0  6180  1484  1152 S  0.0  0.1  0:02.35 /bin/sh /usr/bin/fanmonitor[/color]
 2674 root       20   0  2104   780   648 S  0.0  0.0  0:00.01 /usr/bin/automountd
 2853 root       20   0  1720   620   548 S  0.0  0.0  0:00.01 /sbin/agetty --noclear -L ttymxc0 115200 vt100
 2882 root       20   0  2068   656   588 S  0.0  0.0  0:00.00 /usr/sbin/crond -fS
 2917 root       20   0  6276  1788  1348 S  0.0  0.1  0:00.23 -sh
 2922 root       20   0  3768   660   584 S  0.0  0.0  0:00.00 /sbin/agetty --noclear tty3
 2940 root       20   0  2896  1308  1128 S  0.0  0.1  0:00.05 avahi-daemon: running [matrixtv.local]
 2959 root       20   0  2896   312   156 S  0.0  0.0  0:00.00 avahi-daemon: chroot helper
 2961 root       20   0 12540  2928  2292 S  0.0  0.2  0:00.09 /usr/sbin/smbd -F
 2990 root       20   0  2376   928   784 S  0.0  0.1  0:00.03 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
 3002 root       20   0 12540   940   304 S  0.0  0.1  0:00.00 /usr/sbin/smbd -F
 3039 root       20   0  2312   468   352 S  0.0  0.0  0:00.00 /usr/sbin/lircd -H default -d /dev/lirc0 /etc/lirc/lircd.conf -o /var/run/lirc/lircd
 3087 root       20   0  6304  1652  1204 S  0.0  0.1  0:00.13 /bin/bash /sbin/setup init
 3114 root       20   0  4992   692   616 S  0.0  0.0  0:00.00 /sbin/agetty --keep-baud ttymxc0 115200 38400 9600
 3130 root       20   0  5236  2192  1832 S  0.0  0.1  0:00.08 /usr/sbin/connmand -n
 3154 root       20   0  6172  1288   972 S  0.0  0.1  0:00.02 /bin/sh /usr/bin/oscam.sh
 3155 root       20   0  4012   684   528 S  0.0  0.0  0:00.00 /usr/bin/oscam -c /etc/oscam
 3157 root       19  -1 18228  2096  1352 S  0.0  0.1  0:00.00 /usr/bin/oscam -c /etc/oscam
 3244 root       19  -1 18228  2096  1352 S  0.0  0.1  0:00.05 /usr/bin/oscam -c /etc/oscam
 3245 root       19  -1 18228  2096  1352 S  0.0  0.1  0:00.00 /usr/bin/oscam -c /etc/oscam
 3246 root       19  -1 18228  2096  1352 S  0.0  0.1  0:00.03 /usr/bin/oscam -c /etc/oscam
 3247 root       19  -1 18228  2096  1352 S  0.0  0.1  0:00.04 /usr/bin/oscam -c /etc/oscam
 3248 root       19  -1 18228  2096  1352 S  0.0  0.1  0:01.58 /usr/bin/oscam -c /etc/oscam
 3156 root       19  -1 18228  2096  1352 S  0.0  0.1  0:01.76 /usr/bin/oscam -c /etc/oscam
 3272 root       20   0  6696  2296   768 S  0.0  0.1  0:00.04 /usr/bin/dialog --clear --no-cancel --backtitle MatrixTV configurator --menu Main menu 21 6
F1Help  F2Setup F3SearchF4FilterF5Tree  F6SortByF7Nice -F8Nice +F9Kill  F10Quit


Edit:
Confirmed: The fan works when reach 70ºC.

Code: Select All Code

[root@matrixtv /sys/devices/virtual/thermal/thermal_zone0]# cat temp
71

[mijanek]

Hi @mijanek, looks like there isn't dvb tbs drivers for their devices (like tbs5925 I have got). Can you check it?

I'm sorry but :

tbs-drivers is not supported on arm, aborting.

Another one secret from TBS


Thanks for the info about the fan

[Cjcr]

Hi @mijanek, looks like there isn't dvb tbs drivers for their devices (like tbs5925 I have got). Can you check it?

I'm sorry but :

tbs-drivers is not supported on arm, aborting.

Another one secret from TBS

What a disappointment

[mijanek]

I made some tests and my best configuration is the latest kerne build and the previous version of smallint xbmcas the latest one is making either choppy video or unsync audio.. so we have to wait now a while

[diabloss]

Mijanek

Is it posible to xcompile Raspberry Pi version of D0scam?
Strange that the same version working on PI and odroid but doesn't work on matrix.
Im looking for an oscam with emu for matrix , an oscam able to read from softcam.keys file.

[mijanek]

@diabloss if you provide the patch for this support, than it can be rebuild. oscam doesn't support this feature by default. Such Hacks are mostly closed source.