TBSDTV Community Forum

I cannot flash/upgrade MOI+ to the latest version 1.0.2. I've read that there are 3 files, uboot, kernel and system files, but on http://www.tbsdtv.com/download/ I can find only the kernel and system.

When performing the flash/upgrade of system with an USB key the display indicates the percent progress of System until 99%, then it restarts to 0% and does never move. Of course the upgrade doesn't succeed. Tried with both kernel and system files at once and only system file present on USB key. Flashing only the kernel does work though.

One more thing, MOI+ does not boot without an USB key plugged in.

I have the same issue?have emailed support but emails are ignored?

pistacio Wrote:
One more thing, MOI+ does not boot without an USB key plugged in.

Same issue here

Hi

Here is the u-boot please have a check


Thanks

Kind Regards

steven

Thanks Steven.

Works like a charm!

Hi

I have the same issue how use this file?

thanks

Hi

check this file and put all update files to USB disk
https://www.tbsdtv.com/download/documen ... I+V1.1.pdf

Thanks

Kind Regards

steven

Hi, I have the same problem with my MOI+. I did put all three files, it counts until 100, then it goes to "System: 0%", and nothing happens. I tried multiple usb drives, mostly they did not even boot (all of them were formatted fat32). Any idea what else could I try?

Thanks, Andras

Hi

Please do not forget format your USB disk to FAT32 and only one partion .

Thanks

Kind Regards

steven