Have a remote machine which we shipped to a customer and we cant get c-band working, SES-6 405w
dvblast
dvblast -a 0 -f 3690000 -s 2740000 -v 18
DVBlast 2.0.0 (git-1.2-122-g102b40d-dirty)
warning: restarting
debug: using linux-dvb API version 5
debug: Frontend "TurboSight TBS 6905 DVBS/S2 frontend" type "QPSK (DVB-S/S2)" supports:
debug: frequency min: 950000, max: 2150000, stepsize: 1011, tolerance: 5000
debug: symbolrate min: 1000000, max: 45000000, tolerance: 0
debug: capabilities:
debug: INVERSION_AUTO
debug: FEC_1_2
debug: FEC_2_3
debug: FEC_3_4
debug: FEC_4_5
debug: FEC_5_6
debug: FEC_6_7
debug: FEC_7_8
debug: FEC_AUTO
debug: QPSK
debug: 2G_MODULATION
debug: FE_CAN_RECOVER
debug: frequency 3690000 is in C-band (lower)
debug: configuring LNB to v=18 p=0 satnum=0
debug: tuning QPSK frontend to f=3690000 srate=2740000 inversion=-1 fec=999 rolloff=35 modulation=legacy pilot=-1
warning: failed opening CAM device /dev/dvb/adapter0/ca0 (No such file or directory)
mumudvb
Info: Main: Streaming. Freq 3694000
Info: Tune: Using DVB card "TurboSight TBS 6905 DVBS/S2 frontend" tuner 0
Info: Tune: Tuning DVB-S to Freq: 1456000 kHz, LO frequency 5150000 kHz Pol:L Srate=5180000, LNB number: 0
Info: Tune: LNB voltage 18V
Info: Tune: DISEQC SETTING SUCCEDED
Info: Tune: FE_STATUS:
But we cannot get anything out of the card
Now we know the disk is good as a cheap $30 receiver works
Anybody able to help
joolz