Hallo,
I have just bought a TBS6290SE with dual tuner and dual CI
But I have a lot of trouble, so right not it is useless.
Problem is:
Tuner A
CI-Not working at all (TBS CI Tools is the only program that can se the CI/CAM module and smartcard)
Only things working are Mux 1 and Mux 2 (Free to air)
Tuner B
CI- Working just fine, but
Tuner keeps say NO signal on DVB-T Mux 1-4
Mux 5,6 DVB-T2 are working fine!
Signal on antenna is very good!!!
Danish tv:
538 Mhz - Mux 1 - DVB-T - free to air
762 Mhz - Mux 2 - DVB-T - free to air
706 Mhz - Mux 3 - DVB-T - encrypted channels
602 Mhz - Mux 4 - DVB-T - encrypted channels
586 Mhz - Mux 5 - DVB-T2 - encrypted channels
618 Mhz - Mux 6 - DVB-T2 - encrypted channels
I think it's the driver that fails
Driver right now is "tbs6290se_win10_dvbt_driver_v1.0.0.2"
On a Windows 10 x64
Tryed following programs:
MediaPortal + Patch
"Working"
+ Tuner B Not working at all include CI, "is able to scan channel on Mux 5,6"
+ Tuner A Mux 1,2 (DVB-T) CI not working - "is able to scan all mux"
DVB-Link (DVB Logic)
"Working"
+ Tuner B Mux 5,6 (DVB-T2) only faild to scan/tune Mux 1-4 - no signal
+ Tuner A Mux 1,2 (DVB-T) CI not working - "is able to scan all mux"
DVB Viewer+ProgDVB+TBS Viewer
Not working at all
I'm able to scan channel
+ Tuner B Mux 5,6 (DVB-T2) only
+ Tuner A Mux All Mux
But It faild to open any channels, include free to air.
(not a codec problem, my other tuner Anysee T2 working fine)
Please help me...