I've been testing this TBS board in linux both with TBS drivers and the open source drivers.
I'm getting a lot of discontinuities and Transport errors when using the normal TBS drivers. The same RF cable works perfectly in a TV.
- Globo - ISDB-T
A x8227 Geniatech works fine under the same conditions also.
With the open source drivers I get a lot of errors also:
./dvblast -a 5 -n 0 -f 497143000 -r /tmp/adapter4.sock -5 ISDBT -b 6 -m qam_64 -G 16
[sudo] password for nonius:
DVBlast 3.1 (git-3.0-15-g12a1eb9-dirty)
warning: restarting
debug: compiled with DVB API version 5.10
debug: using DVB API version 5.10
debug: Frontend "Turbosight TBS 6814 (Quad ISDB-T)" supports:
debug: frequency min: 76000000, max: 858000000, stepsize: 166667, tolerance: 0
debug: symbolrate min: 0, max: 0, tolerance: 0
debug: capabilities:
debug: INVERSION_AUTO
debug: FEC_1_2
debug: FEC_2_3
debug: FEC_3_4
debug: FEC_5_6
debug: FEC_7_8
debug: FEC_AUTO
debug: QPSK
debug: QAM_16
debug: QAM_64
debug: QAM_AUTO
debug: TRANSMISSION_MODE_AUTO
debug: GUARD_INTERVAL_AUTO
debug: HIERARCHY_AUTO
debug: FE_CAN_RECOVER
debug: FE_CAN_MUTE_TS
debug: delivery systems:
debug: ISDBT
debug: ISDB stuff
debug: tuning ISDB-T frontend to f=497143000 bandwidth=6 inversion=-1 fec_hp=999 fec_lp=999 hierarchy=-1 modulation=qam_64 guard=16 transmission=-1
warning: failed opening CAM device /dev/dvb/adapter5/ca0 (No such file or directory)
debug: setting filter on PID 0
debug: setting filter on PID 16
debug: setting filter on PID 17
debug: setting filter on PID 18
debug: setting filter on PID 19
debug: setting filter on PID 20
error: no config file
^Cinfo: Shutdown was requested.
nonius@nonius:~/dvblast$ sudo ./dvblast -a 5 -n 0 -f 497000000 -r /tmp/adapter4.sock -5 ISDBT -b 6 -m qam_64 -G 16
DVBlast 3.1 (git-3.0-15-g12a1eb9-dirty)
warning: restarting
debug: compiled with DVB API version 5.10
debug: using DVB API version 5.10
debug: Frontend "Turbosight TBS 6814 (Quad ISDB-T)" supports:
debug: frequency min: 76000000, max: 858000000, stepsize: 166667, tolerance: 0
debug: symbolrate min: 0, max: 0, tolerance: 0
debug: capabilities:
debug: INVERSION_AUTO
debug: FEC_1_2
debug: FEC_2_3
debug: FEC_3_4
debug: FEC_5_6
debug: FEC_7_8
debug: FEC_AUTO
debug: QPSK
debug: QAM_16
debug: QAM_64
debug: QAM_AUTO
debug: TRANSMISSION_MODE_AUTO
debug: GUARD_INTERVAL_AUTO
debug: HIERARCHY_AUTO
debug: FE_CAN_RECOVER
debug: FE_CAN_MUTE_TS
debug: delivery systems:
debug: ISDBT
debug: ISDB stuff
debug: tuning ISDB-T frontend to f=497000000 bandwidth=6 inversion=-1 fec_hp=999 fec_lp=999 hierarchy=-1 modulation=qam_64 guard=16 transmission=-1
warning: failed opening CAM device /dev/dvb/adapter5/ca0 (No such file or directory)
debug: setting filter on PID 0
debug: setting filter on PID 16
debug: setting filter on PID 17
debug: setting filter on PID 18
debug: setting filter on PID 19
debug: setting filter on PID 20
error: no config file
warning: transport_error_indicator on pid 18 (EPG, sid 0)
warning: transport_error_indicator on pid 16 (NIT, sid 0)
warning: transport_error_indicator on pid 20 (TDT/TOT, sid 0)
warning: TS discontinuity on pid 16 expected_cc 10 got 7 (NIT, sid 0)
warning: transport_error_indicator on pid 16 (NIT, sid 0)
warning: transport_error_indicator on pid 17 (SDT, sid 0)
warning: TS discontinuity on pid 17 expected_cc 7 got 8 (SDT, sid 0)
warning: transport_error_indicator on pid 17 (SDT, sid 0)
warning: TS discontinuity on pid 18 expected_cc 12 got 8 (EPG, sid 0)
warning: transport_error_indicator on pid 18 (EPG, sid 0)
warning: transport_error_indicator on pid 19 (..., sid 0)
warning: TS discontinuity on pid 18 expected_cc 9 got 14 (EPG, sid 0)
warning: transport_error_indicator on pid 18 (EPG, sid 0)
warning: transport_error_indicator on pid 0 (PAT, sid 0)
warning: TS discontinuity on pid 17 expected_cc 9 got 5 (SDT, sid 0)
warning: transport_error_indicator on pid 17 (SDT, sid 0)
warning: TS discontinuity on pid 0 expected_cc 10 got 0 (PAT, sid 0)
warning: transport_error_indicator on pid 0 (PAT, sid 0)
warning: TS discontinuity on pid 0 expected_cc 1 got 4 (PAT, sid 0)
warning: transport_error_indicator on pid 0 (PAT, sid 0)
warning: TS discontinuity on pid 0 expected_cc 5 got 8 (PAT, sid 0)
debug: new PAT tsid=32736 version=14
debug: * NIT pid=16
debug: * program number=1024 pid=496
debug: * program number=1025 pid=1008
debug: * program number=1408 pid=8136
debug: * program number=65520 pid=7408
debug: end PAT
warning: TS discontinuity on pid 0 expected_cc 9 got 7 (PAT, sid 0)
warning: transport_error_indicator on pid 0 (PAT, sid 0)
warning: TS discontinuity on pid 0 expected_cc 8 got 9 (PAT, sid 0)
warning: TS discontinuity on pid 18 expected_cc 15 got 3 (EPG, sid 0)
warning: TS discontinuity on pid 17 expected_cc 6 got 14 (SDT, sid 0)
debug: new SDT actual tsid=32736 version=0 onid=32736
debug: * service sid=1024 eit_schedule eit_pf running=0
warning: couldn't convert from to UTF-8 (Invalid or incomplete multibyte or wide character)
debug: - desc 48 service type=0x1 provider="" service="▒El5~"
debug: - desc c1 unknown length=1 value=84
debug: - desc cf unknown length=7 value=01fe00f0000400
debug: * service sid=1025 eit_schedule eit_pf running=0
warning: couldn't convert from to UTF-8 (Invalid or incomplete multibyte or wide character)
debug: - desc 48 service type=0x1 provider="" service="▒El5~"
debug: - desc c1 unknown length=1 value=84
debug: - desc cf unknown length=3 value=02fe00
debug: * service sid=1408 eit_pf running=0
warning: couldn't convert from to UTF-8 (Invalid or incomplete multibyte or wide character)
debug: - desc 48 service type=0xc0 provider="" service="▒El5~"
debug: - desc c1 unknown length=1 value=88
debug: - desc cf unknown length=10 value=030e4e484b0f215d0e47
debug: end SDT
Any help ideas? Did anyone give it a go in both forms that might be able to shed some light?
Thank you.