by qz3fwd » Mon Nov 21, 2016 4:12 am
I have AMD + 6704 and it works fine. TVH is not the most user friendly nor well laid out program but I was able to find my way.
Take care you are connecting the coax cable to the correct connector on the 6704 card. There are 2 F connectors. 1 is the input signal, and the other is pass through. If you connect to the pass through connector you will not get anything. The card as I recall is not labeled well, nor did I receive any information with the unit/cards, and I didn't see anything on their website.
Good luck. The AMD is NOISY!