6903X Problem Tuning

[iko]

If I want to scan multiple MIS transponders (streams), I have to scan MIS first, then DVB-S2 and then MIS again. If I scanned only MIS (also from the same transponder), there would be no signal at the second and subsequent transponders.

Is it possible to fix this error?

[crazycat]

i can check if you provide remote access for me.

[iko]

I just found out that French MIS on 5°W now works with the new driver. The first stream has BER 0, all others already have errors.

Code: Select All Code

----------------------------------> Using DVB-S2
>>> tune to: 12732:VC89M5O35S1P80015361:S5W:29500:
DVB-S IF freq is 2132000
status 1f | signal strength  73% | snr  68% | ber 0 | unc 0
>>> parse_section, section number 0 out of 0...!
0x0001 0x0101: pmt_pid 0x006E GR1 B -- France 2 (running)
0x0001 0x0104: pmt_pid 0x0136 GR1 B -- France 4 (running)
0x0001 0x0106: pmt_pid 0x0262 GR1 B -- franceinfo: (running)
0x0001 0x0110: pmt_pid 0x00D2 GR1 -- France 3 (running)
----------------------------------> Using DVB-S2
>>> tune to: 12732:VC89M5O35S1P80015364:S5W:29500:
DVB-S IF freq is 2132000
status 1f | signal strength  73% | snr  69% | ber 213 | unc 0
>>> parse_section, section number 0 out of 0...!
0x0004 0x0401: pmt_pid 0x0064 Multi4 -- M6 (running)
0x0004 0x0402: pmt_pid 0x00C8 Multi4 -- W9 (running)
0x0004 0x0407: pmt_pid 0x012C Multi4 -- Arte (running)
0x0004 0x0415: pmt_pid 0x0190 Multi4 -- France 5 (running)
0x0004 0x0416: pmt_pid 0x01F4 Multi4 -- 6ter (running)
0x0004 0x0417: pmt_pid 0x0258 Multi4 -- Arte.Tv (running)
>>> parse_section, section number 0 out of 0...!
----------------------------------> Using DVB-S2
>>> tune to: 12732:VC89M5O35S1P80015366:S5W:29500:
DVB-S IF freq is 2132000
status 1f | signal strength  72% | snr  69% | ber 110 | unc 0
>>> parse_section, section number 0 out of 0...!
0x0006 0x0601: pmt_pid 0x0064 SMR6 -- TF1 (running)
0x0006 0x0602: pmt_pid 0x00C8 SMR6 -- NRJ12 (running)
0x0006 0x0606: pmt_pid 0x0258 SMR6 -- TMC (running)
0x0006 0x0608: pmt_pid 0x01F4 SMR6 -- TFX (running)
0x0006 0x0609: pmt_pid 0x02BC SMR6 -- LCP (running)
Done.



The problem is only with the Italian MIS on 5°W. Problem with high symbol rate (35300000)? The French MIS has SR: 29500000.

Code: Select All Code


using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
initial transponder DVB-S2 11013000 V 35300000 2/3 35 8PSK 1 1 131070
initial transponder DVB-S2 11013000 V 35300000 2/3 35 8PSK 3 1 131070
initial transponder DVB-S2 11013000 V 35300000 2/3 35 8PSK 5 1 131070
----------------------------------> Using DVB-S2
>>> tune to: 11013:VC23M5O35S1P100662785:S5W:35300:
DVB-S IF freq is 1263000
status 1f | signal strength  77% | snr  68% | ber 0 | unc 0
>>> parse_section, section number 0 out of 0...!
0x0071 0x044D: pmt_pid 0x0065 Rai -- Rai 1 HD (running)
0x0071 0x044E: pmt_pid 0x0066 Rai -- Rai 2 HD (running)
0x0071 0x044F: pmt_pid 0x0067 Rai -- Rai News 24 (running)
0x0071 0x0456: pmt_pid 0x00AA Rai -- Rai 3 HD (running)
0x0071 0x0457: pmt_pid 0x00AB Rai -- Rai 3 TGR Lombardia HD (running)
0x0071 0x0458: pmt_pid 0x00AC Rai -- Rai 3 TGR Piemonte HD (running)
0x0071 0x0459: pmt_pid 0x00AD Rai -- Rai 3 TGR Emilia-Romagna (running)
0x0071 0x045A: pmt_pid 0x00AE Rai -- Rai 3 TGR Lombardia HD (running)
0x0071 0x045B: pmt_pid 0x00AF Rai -- Rai 3 TGR Piemonte HD (running)
0x0071 0x045C: pmt_pid 0x00B0 Rai -- Rai 3 TGR Emilia-Romagna (running)
0x0071 0x045E: pmt_pid 0x00B2 Rai -- Rai News 24 (running)
----------------------------------> Using DVB-S2
>>> tune to: 11013:VC23M5O35S1P100662787:S5W:35300:
DVB-S IF freq is 1263000
WARNING: >>> tuning failed!!!
>>> tune to: 11013:VC23M5O35S1P100662787:S5W:35300: (tuning failed)
DVB-S IF freq is 1263000
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S2
>>> tune to: 11013:VC23M5O35S1P100662789:S5W:35300:
DVB-S IF freq is 1263000
WARNING: >>> tuning failed!!!
>>> tune to: 11013:VC23M5O35S1P100662789:S5W:35300: (tuning failed)
DVB-S IF freq is 1263000
WARNING: >>> tuning failed!!!
Done.