Hi , I am a newbie so I hope this isn't a dumb post. Last week I purchased a new TBS 6902 with hopes of adding a second satellite dish for PIP capibilities with DVBviewer 5.1. The existing setup was a Hauppauge WinTV HVR 2255 and a Prof 7500 which gave me any combination of PIP I desired operating in Windows Vista, (the Hauppauge card wouldn't work with DVBViewer in Windows 7 or Windows 10). I installed the new TBS 6902 using driver version 1.0.0.1 but none of the diseqc commands worked. I removed the diseqc switch and made a direct connection to the Cband LNB and it worked fine but the diseqc 1.2 motor command still didn't work. I downloaded the latest DVBviewer Trial ware , same result. I downloaded SichboPVR and the diseqc switch worked but the motor command didn't work.
I down loaded TBSviewer and had the same results as DVBviewer. I down loaded TBS-IPdata and got an error message OnOK m_pksCtrl Failed. I down loaded DVBdream 2.81 trialware. The diseqc functions all work but PIP using different cards didn't work. I tried all of the above in Windows 7 & 10 with the same result. My question is ,is there a work around to make this card work with my favorite player DVBviewer or is there a player where everything works? Thank in advance for any help you can offer.......Duane