Dear All,
I bought a tbs5520SE some time ago, and it was working fine on an old computer running ubuntu 17.04.
I have bought a new pc with an i7, retored by laptop operating system on it, and noticed that:
- my tbs 5927 was working fine
- my tbs 5520se (seen as 5521 in the syslog!) was causing some errors si2183 5-0067: read_status failed=-11
(even when this not working, my old laptop works pretty well with the same tbs cards/dish, so this is not a tuner or dish issue)
I then decided to reinstall from scratch my new PC i7:
- installed a Ubtuntu 18.04
- reinstalled tvheadend
- recompiled the tbs drivers
and..... I got the same error si2183 5-0067: read_status failed=-11
Thsi error is a bit random, sometimes after running tvheadend I get it, sometimes I do not get error.
Not knowing what to do anymore, I played a bit and I noticed that after a reboot, if I run tvheadend once in crash mode (-A parameter), and then run tvheadend normally, I do not get the error anymore!
What could it be?
PS: tvheadend is started by using a proper udev configuration, waiting for the tuner devices to be available before starting tvheadend. So it is not a timing issue, but seems related to the drivers.
Any idea on how to fix this ? Driver issue? I saw something about IR remote control (that I do not have), do I need to change the driver code?
Thank you.
Regards,