Thanks a lot Mike.
Best regards,
Sami
krajok Wrote:I think my problem should be my Ubuntu is amd64 because header of v4l2-compat-ioctl32.c is about 32bit and 64bit conversion.
Tomorrow I will reinstall my OS with Ubuntu x86 (32bit)
/*
* ioctl32.c: Conversion between 32bit and 64bit native ioctls.
* Separated from fs stuff by Arnd Bergmann <arnd@arndb.de>
*
* Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 2001,2002 Andi Kleen, SuSE Labs
* Copyright (C) 2003 Pavel Machek (pavel@suse.cz)
* Copyright (C) 2005 Philippe De Muyter (phdm@macqel.be)
* Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
*
* These routines maintain argument size conversion between 32bit and 64bit
* ioctls.
*/
stevellion Wrote:Well - after the above, it Makes, boots and loads.. now to see if I can make it work with MythTV...
sudo scan-s2 -v -a 0 dvb-s/Astra-28.2E
API major 5, minor 1
scanning dvb-s/Astra-28.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder DVB-S 10773000 H 22000000 5/6 AUTO AUTO
initial transponder DVB-S2 10773000 H 22000000 5/6 AUTO AUTO
initial transponder DVB-S 11778000 V 27500000 2/3 AUTO AUTO
initial transponder DVB-S2 11778000 V 27500000 2/3 AUTO AUTO
----------------------------------> Using DVB-S
>>> tune to: 10773:hC56S0:S0.0W:22000:
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 18V, loband (index 1)
DVB-S IF freq is 1023000
>>> tuning status == 0xFFFF8800
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 10773:hC56S0:S0.0W:22000: (tuning failed)
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 18V, loband (index 1)
DVB-S IF freq is 1023000
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S2
>>> tune to: 10773:hC56S1:S0.0W:22000:
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 18V, loband (index 1)
DVB-S IF freq is 1023000
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 10773:hC56S1:S0.0W:22000: (tuning failed)
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 18V, loband (index 1)
DVB-S IF freq is 1023000
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x03
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S
>>> tune to: 11778:vC23S0:S0.0W:27500:
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1178000
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 11778:vC23S0:S0.0W:27500: (tuning failed)
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1178000
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S2
>>> tune to: 11778:vC23S1:S0.0W:27500:
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1178000
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 11778:vC23S1:S0.0W:27500: (tuning failed)
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1178000
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
szap-s2 -n 001
reading channels from file '~/.szap/channels.conf'
zapping to 1 'Channel 4;BSkyB':
delivery DVB-S, modulation QPSK
sat 0, frequency 10714 MHz H, symbolrate 22000000, coderate 5/6, rolloff 0.35
vpid 0x090b, apid 0x090c, sid 0x090e
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal bf4c | snr e2fb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4b | snr e2fb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4c | snr e2fb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4c | snr e2fb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4c | snr e4b0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4d | snr e2fb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bf4d | snr e2fb | ber 00000000 | unc 00000000 | FE_HAS_LOCK
Users browsing this forum: No registered users and 9 guests