after installing the tbs driver (linux-tbs-drivers_110710) i get the following output from dmesg:
- Code: Select All Code
[ 14.814756] cx23885 driver version 0.0.2 loaded
[ 14.814787] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.814791] cx23885[0]: Your board isn't known (yet) to the driver.
[ 14.814792] cx23885[0]: Try to pick one of the existing card configs via
[ 14.814793] cx23885[0]: card=<n> insmod option. Updating to the latest
[ 14.814794] cx23885[0]: version might help as well.
[ 14.814795] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 14.814797] cx23885[0]: card=0 -> UNKNOWN/GENERIC
[ 14.814799] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
[ 14.814800] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
[ 14.814801] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
[ 14.814803] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
[ 14.814804] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
[ 14.814806] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
[ 14.814807] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
[ 14.814808] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
[ 14.814810] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
[ 14.814811] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
[ 14.814813] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
[ 14.814814] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
[ 14.814816] cx23885[0]: card=13 -> Compro VideoMate E650F
[ 14.814817] cx23885[0]: card=14 -> TurboSight TBS 6920
[ 14.814819] cx23885[0]: card=15 -> TeVii S470
[ 14.814820] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
[ 14.814821] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
[ 14.814823] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
[ 14.814824] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
[ 14.814825] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
[ 14.814827] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
[ 14.814828] cx23885[0]: card=22 -> Mygica X8506 DMB-TH
[ 14.814830] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
[ 14.814831] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
[ 14.814833] cx23885[0]: card=25 -> Compro VideoMate E800
[ 14.814834] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290
[ 14.814835] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH
[ 14.814837] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200
[ 14.814839] cx23885[0]: card=29 -> GoTView X5 3D Hybrid
[ 14.816726] CORE cx23885[0]: subsystem: 6981:8888, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 14.943737] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 14.943744] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfe800000
[ 14.943751] cx23885 0000:02:00.0: setting latency timer to 64
[ 14.943930] cx23885 0000:02:00.0: irq 43 for MSI/MSI-X
Will be TBS6981 not supported?
If possible give your answer in german, thanks.
My System: 32-bit ubuntu 11.04 (kernel 2.6.38-10-generic-pae)
Mainboard: Biostar TA785G3-HD