Unicable-Support with Linux AND CI?

[smartysmart34]

Hi all, I realise there is a section for the TBS6981 but unfortunately NOT for 6991?

I am looking for a dual tuner card WITH CI module. How do i get that? Is there an additional module I could attach to the 6981?

The system I plan to put the card in is a OpenSuse 11.4 with mythtv. Does the 6981 support unicable with that? Or ist there any TBS-card supporting Unicable in Linux and with mythtv? Which multituner card should I chose for Linux if I want a CI module?

Sorry for the basic question but I'm confused....

Kind regards,
Martin Soltau

[steven]

Hi smartysmart34

For your first question
>Is there an additional module I could attach to the 6981?
Still do not have this module as we know.

Second question about the unicable
This is depend on the soft ,our driver has all the need interface to use with unicable.

Last if you want to buy a TBS6991 dual CI you can contact with sales@tbsdtv.com she will
give you the detail information.

and would you mind giving us your CAM's detail information so we can check whether your
CAM is supported .

Kind regards

steven

[smartysmart34]

Hi smartysmart34

Second question about the unicable
This is depend on the soft ,our driver has all the need interface to use with unicable.

Last if you want to buy a TBS6991 dual CI you can contact with sales@tbsdtv.com she will
give you the detail information.

and would you mind giving us your CAM's detail information so we can check whether your
CAM is supported .

Hi Steven,
Thank you for the information.
So unfortunately the Unicable support is not transparent to the application.
I do not have a CAM yet as I am beginning to sort things out. But as soon as I have one I'll send it through.
Might take a couple of weeks though

Regards,
Martin