Moderator Control Panel ]

No RTSP OK after a teardown command

No RTSP OK after a teardown command

Postby ybuser » Mon Feb 10, 2020 9:53 pm

Hello,

I would like to report a problem with TBS2604. After sending a TEARDOWN command to close a stream the TBS2604 doesn't answer with a RTSP/1.0 200 OK.

This cause problem with the VMS that i use because i cannot restart a stream right after closing the first stream.

Please advise.

Thank you
ybuser
 
Posts: 2
Joined: Sat Feb 08, 2020 4:39 am

Re: No RTSP OK after a teardown command

Postby daowei » Wed Feb 12, 2020 10:43 am

Hi,
Just checked with our Encoder Engineer, she said need to check the code first about the "teardown to stop streaming". Any news, we'll upate to you. We're still on a vacation, when we back to work, we'll check.

Thanks
daowei
 
Posts: 121
Joined: Fri Aug 12, 2016 6:17 pm

Re: No RTSP OK after a teardown command

Postby ybuser » Thu May 14, 2020 2:37 am

Any news regarding the teardown command.

thank you
ybuser
 
Posts: 2
Joined: Sat Feb 08, 2020 4:39 am


Return to TBS2604 / TBS2640 4K UHD HD H.265 & H.264 HDMI Video Encoder

Who is online

Users browsing this forum: No registered users and 1 guest