Thanks DeEmEx
11679.00 V 27000 1/2 by http://ru.kingofsat.net/pos-5W.php
or
11679 V 27500 2/3 by http://www.lyngsat.com/ab3.html
or
11667V by cody?
Boothby Wrote:Thanks for the infoAre you sure you don't mean VCM? Because ACM in this case (transportation of digital terrestrial multiplex) wouldn't make much sense.cody Wrote:* 12717H on 12.5W: really crazy, i need to check if you guys already posted the constellation diagram here, but according to our analysis it's ACM with 4 active Multiple Input Streams (MIS) enabled
I'm asking also because in the Base Band Header VCM is signaled as ACM:
"CCM/ACM field (1 bit): Constant Coding and Modulation or Adaptive Coding and Modulation (VCM is signalled as ACM)." (copy&paste from ETSI EN 302 307 1.1.2, page 17)
The constellation was in the link posted by Enosat in the last post of the first page: http://ipbox.wz.cz/mediaset.htm
DeEmEx Wrote:Cody, so from analyze what you did, can you confirm that these mediaset are 8PSK? (but as '8PSK+8PSK' two 8PSK transponders in one [not same as 16APSK]).
VictorLS Wrote:Thank you cody
But what about answers about parameters of 5W 16APSK and program support of 6925?
cody Wrote:Boothby Wrote:Thanks for the infoAre you sure you don't mean VCM? Because ACM in this case (transportation of digital terrestrial multiplex) wouldn't make much sense.cody Wrote:* 12717H on 12.5W: really crazy, i need to check if you guys already posted the constellation diagram here, but according to our analysis it's ACM with 4 active Multiple Input Streams (MIS) enabled
I'm asking also because in the Base Band Header VCM is signaled as ACM:
"CCM/ACM field (1 bit): Constant Coding and Modulation or Adaptive Coding and Modulation (VCM is signalled as ACM)." (copy&paste from ETSI EN 302 307 1.1.2, page 17)
The constellation was in the link posted by Enosat in the last post of the first page: http://ipbox.wz.cz/mediaset.htm
i'm not looking at Base Band Header, but what ST-based NIM is reporting in its status registers, but i need to check again, because maybe i mismatched which bit is set in the status registers and it's VCM and not ACM. so, i will double check and let you know.
Users browsing this forum: No registered users and 13 guests