TBS6925 DVBS2 GoldCode support now............

[stp]

Thanks steven for your work !
What about TBS-5925 with new drivers and new TS Recorder ?
Thanks for reply.
Regards

[satesco]

Hi steven,

After I changed the LNB High setting at 10600,I managed to locked one and only dvb-s2 transponder{12648} from 5.0W with TBS Recorder-Gold Code running under Windows XP.All other PSL transponders still being unlocked!!!Only by Root dvb-s2 signal could be locked from this position-5.0W.I tried all options but I only managed to locked signal only by Root Code
I updated both drivers as well as the tool that you put on this topic.

[DVB]

As far as I know at 5°W there is only one Gold transponder (12648), all other are in Root mode, so 12648 should be locked as Gold (121212), others as Root (Mediaset with code 8, RAI with 16416).

[steven]

Thanks steven for your work !
What about TBS-5925 with new drivers and new TS Recorder ?
Thanks for reply.
Regards

Hi stp

About TBS-5925's new driver and new TS Recorder will be released soon too.

Kind Regards

steven

[stp]

Thanks steven
Regards

[satesco]

@DVB,Thanks for the reply

Now works (Successful set the GoldCode!)

On what transponder you've done tests with GoldCode?Om 12648 from 5.0W?

I can confirm - working for me with Root on Hot Bird 13°E ...

I can also confirm that I locked 11,432 with Root
Until now it has not been confirmed that with GoldCode can lock other transponders with TBSRecorder It seems that only one at 5.0W can be lock with GoldCode !?I am wrong?

[DVB]

On what transponder you've done tests with GoldCode?Om 12648 from 5.0W?

Yes, at 5°W, 12,648V

Until now it has not been confirmed that with GoldCode can lock other transponders with TBSRecorder It seems that only one at 5.0W can be lock with GoldCode !?I am wrong?

You are right because this is the only one transponder that works in Gold mode, all other are Root, so cannot lock them with Gold. All OK Now we need to wait for other transponders with Gold... or maybe somebody already found some? In mis.ini ffrom crazycat BDA2 device for AltDVB I see two frequencies at 88°E, but it looks like it is beam pointed on... Malaysia, Indonesia, Philippines, partially China, maybe somebody from TBS is able to check it?

Frequencies at 88°E (if correct) should be:
11,633 GHz, pol. H, SR: 30000, PLS Gold, Code 30000, MIS: 38, 48, 52
11,668 GHz, pol. H, SR: 30000, PLS Gold, Code 30000, MIS: 36, 40, 50
Beam: http://business.singtel.com/satellite/st2/ku-band.asp (Ku-band beam 1)

If crazycat will look here: do You know maybe anything more about that frequencies from 88°E? Not listed on Flysat, on Lyngsat listed as standard DVB-S2 with Chungwa Telecom packages...

[crazycat]

Gold 30000 maybe incorrect maybe TBS guys can check this transponders and detect proper PLS code with CrazyScan.

[steven]

Hi crazycat

We are sorry that in our place 88°E's signal is very weak,need a large satellite dish, ,We can let the people who can received
88°E's signal to have a test.

Kind Regards

steven

[crazycat]

yes, need 1.2 and more dish (better offset with good LNB)