when i try to use it , my card can't tune (no signal) even with fta channels.
afrer load dvbloopback module dmesg shows:
- Code: Select All Code
modprobe dvbloopback
[ 1832.354283] dvb-usb: TBS QBOXS3 DVBS2 USB2.0 successfully initialized and connected.
[ 1857.258922] /home/marcin/src/sc/contrib/sasc-ng/dvbloopback/module/dvb_loopback.c: frontend loopback driver v0.0.1
[ 1857.258933] dvbloopback: registering 1 adapters
[ 1857.260512] DVB: registering new adapter (DVB-LOOPBACK)
now i'm starting sasc-ng
- Code: Select All Code
root@dragon:~# /usr/local/bin/sasc-ng -j 0:1 --cam-budget --cam-dir /etc/sc_files/ --sid-nocache --buffer 8M
Aug 15 12:32:11.253 : Version: 0.0.2-e44bd34b6277+
Aug 15 12:32:11.254 CAM: initializing plugin: SoftCam (1.0.0pre-HG-e44bd34b6277+): A software emulated CAM
Aug 15 12:32:11.254 CAM(general.info): SC version 1.0.0pre-HG-e44bd34b6277+ initializing (VDR 1.6.0)
Aug 15 12:32:11.254 CAM: starting plugin:
Aug 15 12:32:11.254 CAM(general.info): SC version 1.0.0pre-HG-e44bd34b6277+ starting (VDR 1.6.0)
Aug 15 12:32:11.254 CAM(core.load): ** Plugin config:
Aug 15 12:32:11.254 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Aug 15 12:32:11.254 CAM(core.load): ** Local systems DON'T take priority over cached remote
Aug 15 12:32:11.254 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Aug 15 12:32:11.254 CAM(core.load): ** Force transfermode with digital audio
Aug 15 12:32:11.254 CAM(core.load): ** ECM cache is set to enabled
Aug 15 12:32:11.254 CAM(core.load): ** TsBufferSize is 4 MB
Aug 15 12:32:11.254 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Aug 15 12:32:11.277 CAM(general.info): loading cardclient config from /etc/sc_files//cardclient.conf
Aug 15 12:32:11.298 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8)
...
Aug 15 12:32:11.298 CAM(cardclient.core): client 'Newcamd' ready
Aug 15 12:32:11.323 CAM(core.net): connecting to ....
Aug 15 12:32:11.471 CAM(cardclient.login): Newcamd: CaID=0100 adm....
Aug 15 12:32:11.471 CAM(general.info): loading keys from /etc/sc_files//SoftCam.Key
Aug 15 12:32:11.471 CAM(core.load): loaded 0 keys from /etc/sc_files//SoftCam.Key
Aug 15 12:32:11.471 CAM(general.info): loading smartcard data from /etc/sc_files//smartcard.conf
Aug 15 12:32:11.471 CAM(core.load): loaded 0 smartcard data from /etc/sc_files//smartcard.conf
Aug 15 12:32:11.471 CAM(general.info): loading cardslot config from /etc/sc_files//cardslot.conf
Aug 15 12:32:11.471 CAM(general.info): loading overrides from /etc/sc_files//override.conf
Aug 15 12:32:11.491 CAM(core.load): loaded 0 overrides from /etc/sc_files//override.conf
Aug 15 12:32:11.491 CAM(general.error): no keys loaded for softcam!
Aug 15 12:32:11.491 CAM(core.load): ** registered systems:
Aug 15 12:32:11.491 CAM(core.load): ** Cardclient (pri -15)
Aug 15 12:32:11.491 CAM(core.load): ** Conax (pri -10)
Aug 15 12:32:11.491 CAM(core.load): ** ConstCW (pri -20)
Aug 15 12:32:11.491 CAM(core.load): ** Cryptoworks (pri -10)
Aug 15 12:32:11.491 CAM(core.load): ** Irdeto (pri -10)
Aug 15 12:32:11.491 CAM(core.load): ** Irdeto2 (pri -8)
Aug 15 12:32:11.491 CAM(core.load): ** Nagra (pri -10)
Aug 15 12:32:11.491 CAM(core.load): ** Nagra2 (pri -10)
Aug 15 12:32:11.491 CAM(core.load): ** Fake-NDS (pri -12)
Aug 15 12:32:11.491 CAM(core.load): ** SC-Conax (pri -5)
Aug 15 12:32:11.491 CAM(core.load): ** SC-Cryptoworks (pri -5)
Aug 15 12:32:11.491 CAM(core.load): ** SC-Irdeto (pri -5)
Aug 15 12:32:11.491 CAM(core.load): ** SC-Nagra (pri -5)
Aug 15 12:32:11.491 CAM(core.load): ** SC-Seca (pri -5)
Aug 15 12:32:11.492 CAM(core.load): ** SC-Viaccess (pri -5)
Aug 15 12:32:11.492 CAM(core.load): ** SC-VideoGuard2 (pri -5)
Aug 15 12:32:11.492 CAM(core.load): ** Seca (pri -10)
Aug 15 12:32:11.492 CAM(core.load): ** @SHL (pri -10)
Aug 15 12:32:11.492 CAM(core.load): ** Viaccess (pri -10)
Aug 15 12:32:12.510 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Aug 15 12:32:12.510 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 15 12:32:12.510 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Aug 15 12:32:12.510 : Listening on port 5456
it seems started. could you tell me if this is proper start of sasc-ng?
im trying start FTA channel:
- Code: Select All Code
marcin@dragon:~$ szap -a 1 '4fun.TV(CYFRA +)'
reading channels from file '/home/marcin/.szap/channels.conf'
zapping to 890 '4fun.TV(CYFRA +)':
sat 0, frequency = 10719 MHz V, symbolrate 27500000, vpid = 0x00a3, apid = 0x005c sid = 0x1134
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
and silen. nothing is going on (i pressed ctrl+c)
dmesg shows (only ones, the first time):
- Code: Select All Code
[ 2138.636105] dvblb_fake_ioctl interrupted: 4
[ 2140.880210] TurboSight TBS 5921 Frontend:
[ 2140.880212] tbs5921fe: software version is 1.24.2
[ 2140.880215] TurboSight TBS 5921 Frontend:
[ 2140.880216] tbs5921fe - Successfully Initialized
When i try to shap scrambled channell it's the same as with the fta channel - silent ans sasc-ng log (in this case on console) is silent too
if i try to run kaffeine with runnig sasc-ng then kaffeine is hanging and won't start
if i disable sasc-ng and try tu run kaffeine, its says:
- Code: Select All Code
kaffeine(17673) DvbLinuxDevice::identifyDevice: couldn't open "/dev/dvb/adapter1/frontend0"
kaffeine(17673) DvbLinuxDevice::identifyDevice: couldn't identify device
why i cannot tune card on virtual dvb? or what do i wrong still?
- Code: Select All Code
root@dragon:/dev/dvb# ll adapter1/
razem 0
drwxr-xr-x 2 root root 280 2011-08-15 14:42 ./
drwxr-xr-x 4 root root 80 2011-08-15 14:42 ../
crw-rw----+ 1 root video 212, 12 2011-08-15 14:42 audio0
crw-rw----+ 1 root video 212, 13 2011-08-15 14:42 audio1
crw-rw----+ 1 root video 212, 6 2011-08-15 14:42 demux0
crw-rw----+ 1 root video 212, 7 2011-08-15 14:42 demux1
crw-rw----+ 1 root video 212, 8 2011-08-15 14:42 dvr0
crw-rw----+ 1 root video 212, 9 2011-08-15 14:42 dvr1
crw-rw----+ 1 root video 212, 4 2011-08-15 14:42 frontend0
crw-rw----+ 1 root video 212, 5 2011-08-15 14:42 frontend1
crw-rw----+ 1 root video 212, 14 2011-08-15 14:42 osd0
crw-rw----+ 1 root video 212, 15 2011-08-15 14:42 osd1
crw-rw----+ 1 root video 212, 10 2011-08-15 14:42 video0
crw-rw----+ 1 root video 212, 11 2011-08-15 14:42 video1
it seems i've no access to virtual card
but chmod o+rw change nothing
maybe my card (tbs5921) can not support virtual dvb ? anybody knows?