H,
Ive just bought a new qbox3, and am having issues trying to get any signal on it.
Heres the list of my complete setup..
htpc - win7 x64 bit
18month old foxtel satellite dish and lnb rated at 10700 and foxtel iq
qbox3 is plugged in, red light is on.
ive tried dvbviewer, tbsviewer and progdvb
drivers are the latest drivers from tbs website.
the 1560.ini file in the transponders directory is as follows: - ive also tried autogenerating latest ones from some website as well
[SATTYPE]
1=1560
2=Optus C1
[DVB]
0=33
1=11720,H,29455,35,14
2=11762,H,27800,34,1
3=11886,H,27800,34,1
4=11928,H,27800,34,1
5=11969,H,27800,34,1
6=12011,H,29455,35,14
7=12052,H,29455,35,14
8=12052,V,27800,34,1
9=12094,H,27800,34,1
10=12094,V,27800,34,1
11=12135,H,27800,34,1
12=12136,V,27800,34,1
13=12177,H,27800,34,1
14=12305,H,30000,34,1
15=12358,H,27800,34,1
16=12367,V,27800,34,1
17=12398,H,27800,34,1
18=12407,V,30000,23,1
19=12438,H,27800,34,1
20=12448,V,30000,35,4
21=12478,H,27800,34,1
22=12487,V,27800,34,0
23=12518,H,27800,34,1
24=12527,V,30000,34,1
25=12558,H,27800,34,1
26=12567,V,30000,35,5
27=12598,H,27800,34,1
28=12607,V,27800,34,1
29=12638,H,27800,34,1
30=12647,V,27800,34,1
31=12688,H,27800,34,1
32=12692,V,28650,12,0
33=12728,V,24450,12,1
interestingly, if I open the tbs-ip tools software, you can see the signal strength and quality levels it just bounces between around 30% and 0% - goes back and forth - quality is always 0
it seems like there is absolutely no signal being received by the qbox..
Ive tried 2 different pcs, 2 different cables and 2 different wall points to the dish.
Its always the same
let me know if you have any ideas on what it might be.
id really like to get this working.
Regards,