I'm new to the forum and not experienced with Linux.
I try to get the TBS 5980 QBox working on my Netgear ReadyNas RN102. The TBS QBox is attached to a unicable multiswitch for two different satelites (Astra 19.2E and Hotbird 13.0E). The Netgear RN102 is running a Debian version.
As TV Software I started with DVBLink and, as I DVBLink was not able to get the channels tuned, I now tried TVHeadend, but with the same problem: channel tuning!
I involved the DVBLink support (see http://forum.dvblogic.com/viewtopic.php?f=76&t=26850&sid=b69846404389e3958cee935ea448ba84), but finally there is no clear answer to my problem.
Is there anybody out there, that has a TBS QBox 5980 working under Debian in a unicable environment with two satelite dishes?
Regards,
Michael
The device itself is okay. I tested it under Windows 7 with DVBViewer in my unicable environment and it works fine. Is there anything I need to consider under Debian? I got the feeling that the unicable commands are not properly generated by the Linux driver or both programs (DVBLink and TVHeadend), because the TVHeadend installation identifies some channels, which seem to be the same channels that an old DBox finds, which is not unicable capable.