i replied to you in an email, but just for completeness and to help other users to copy it here and even explain in short - the frequency offset you get is probably due to bad LNB:
On 27.11.2013 г. 09:40, Turbosight Europe wrote:
>
> hi Lujo,
>
> the card has auto-frequency-acquisition - that's hardware feature, but you can control it in the driver - within what range to try to fine tune the frequency. so, let me give you an example - if auto-frequency-acquisition is set to 5MHz and you tune transponder with frequency X, then all frequencies between [X-5, X+5] are tried by the hardware in order to find the best one - that's to compensate for any frequency offset, because faulty or low-quality LNB can add error and shift the frequency with few MHz.
>
> best regards,
> constantine
>
> On 27.11.2013 г. 05:33, administrator wrote:
>> Form details below.
>>
>> Subject: Can not scan Eutelsat 16A 12596.94 V 2848 2/3
>> Product Model: TBS6922
>> Support Type: Technical
>> System: Windows
>> Title: Mr
>> First Name: L.
>> Last Name: L
>> Email:
>> Telephone:
>> Company Name:
>> Comments:
>> Hello,
>>
>> I have already send you email about my problem:
viewforum.php?f=42>>
>> My question is does TBS 6922 or other TBS dvb-S2 cards have AFC (Automatic frequency control):
http://en.wikipedia.org/wiki/Automatic_ ... cy_control>>
>> Is this something what needs to be on the card it self (hardware) or is this option which could be present in the driver (software)?
>>
>> Please see my problem and you can answer in above forum thread.
>>
>> Kind Regards,
>>
>> Lujo
>>