Hello!
Last week I received the TBS 8922. I could not get it working on my system (mainboard: Asus M4N78) in Windows 7 x64 with the only currently available driver version (1.0.1.6): The signal strength and quality seem to be displayed correctly in DVBViewer 5.5.2, but no transport stream data seems to be received from the driver (DVBSource filter: no data, connected). The problem was similar with CrazyScan: The RFScan works alright, transponder parameters are found correctly, but no data could be saved using the streaming function.
To identify the problem, I tried to get it working on the same hardware configuration but Windows XP x86 instead (with x86 version of driver 1.0.1.6). Result: It worked perfectly both in DVBViewer 5.5.2 and CrazyScan!
Re-installation of Windows 7 x64 from scratch didn't help, so the malfunction in Windows 7 x64 can't have been due to a corrupted Windows installation.
Conclusion: There seems to be an issue with the x64 driver (at least version 1.0.1.6) of the TBS 8922 and Windows 7 x64. I could read here on the forums that I'm not the first one with this issue (however, in some cases other cards like TBS 8920 and 8921 were affected) and that a modified driver could help.
Help with another driver to test would be greatly appreciated, as with the current driver, the TV card is of no use for me, so that I would return it to TBS.
Thanks a lot in advance!
Stefan